Airtac SAID100 Double Rod Cylinder SAID100X110
The AirTAC Airtac SAID100 Double Rod Cylinder SAID100X110 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 110mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke110 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID100 Double Rod Cylinder SAID100X110
The AirTAC SAID100X110 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 100mm bore and 110mm stroke. Because a carbon steel rod exits both end covers, the annulus area is identical on extend and retract, yielding equal force and speed in both directions. This design outputs 3681N each way at 0.5 MPa, reaching 5153N at 0.7 MPa.
Twin rods allow you to mount a primary workpiece on the front thread (M20x1.5) and a position flag or cam on the rear. The extruded aluminum barrel includes sensor grooves on both sides; specify the -S magnet option if you intend to use AirTAC CMSE reed or DMSE electronic solid-state switches.
Airtac SAID100 Double Rod Cylinder SAID100X110 Technical Specifications
| Model | Airtac SAID100 Double Rod Cylinder SAID100X110 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID100 Double Rod Cylinder SAID100X110
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID100 Double Rod Cylinder SAID100X110 Is Used
Symmetric Force Transfer
Drives heavy platens requiring identical push and pull dynamics, leveraging the 3681N both-way output at 0.5 MPa to ensure consistent cycle timing without pressure spikes.
Anti-Rotation Slides
Uses the twin-rod geometry to guide heavy vertical loads securely, preventing piston drift and mechanical binding on long-stroke press operations.
Rear-Rod Sensing Flag
Mounts a physical cam or DMSE sensor target on the rear rod end to trigger downstream logic, keeping the primary front tooling clear of obstructions.
Is the Airtac SAID100 Double Rod Cylinder SAID100X110 the Right Cylinder?
Select this 100mm bore when an application requires substantial symmetric force, as it generates 3681N in both directions at 0.5 MPa. If your load requires less force, stepping down to the 80mm bore provides 2268N both ways, saving space and air volume. Choose the SAID double-rod configuration over a single-rod SAI when you need dual-side guidance, enhanced anti-rotation resistance, or rear-rod actuation.
This cylinder uses a PT tapered G1/2 port and supports mountings Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). It is dimensionally interchangeable per ISO 15552. Note that variable air cushions only decelerate the piston near stroke end; if the system must hold a load without live air pressure, integrate an external rod lock or consider the BSAID clamp-lock series.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID100 Double Rod Cylinder SAID100X110 FAQ
Because it is a double-rod cylinder, the force is identical in both directions. It provides 3681N at 0.5 MPa, 5153N at 0.7 MPa, and 6626N at 0.9 MPa for both extend and retract strokes.
Yes, the SAID100X110 is dimensionally interchangeable per ISO 15552. It shares the standard mounting interface and G1/2 port, making it a drop-in replacement for other ISO 15552 double-rod profile cylinders.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAID100 Double Rod Cylinder SAID100X110
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.