Airtac SAID200 Double Rod Cylinder SAID200AX1000S
The AirTAC Airtac SAID200 Double Rod Cylinder SAID200AX1000S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 1000mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ200 mm
- Stroke1000 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
About the Airtac SAID200 Double Rod Cylinder SAID200AX1000S
The AirTAC SAID200X1000-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a substantial 200 mm bore and a 1000 mm stroke. Because a piston rod exits both end covers, the effective annulus area is identical on extend and retract. This geometry yields perfectly symmetric thrust, delivering 15079 N of force in both directions at 0.5 MPa. Equipped with a SUS420J2 stainless steel rod (option A), it provides excellent corrosion resistance for harsh environments.
This through-rod configuration allows engineers to mount the primary workpiece on one end while attaching a position flag, cam, or secondary mechanism to the rear rod. The extruded aluminum barrel includes sensor grooves on both sides, and the included -S magnet enables precise detection using AirTAC CMSE reed or DMSE solid-state switches. Adjustable air cushions at both ends decelerate the piston smoothly, though they do not lock the load if air pressure is lost.
Airtac SAID200 Double Rod Cylinder SAID200AX1000S Technical Specifications
| Model | Airtac SAID200 Double Rod Cylinder SAID200AX1000S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID200 Double Rod Cylinder SAID200AX1000S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID200 Double Rod Cylinder SAID200AX1000S Is Used
Symmetric Transfer
Drives heavy-duty transfer carriages where the equal 15079 N push and pull forces at 0.5 MPa ensure consistent momentum and cycle times in both travel directions.
Twin-Station Actuation
Utilizes both rod ends simultaneously to operate opposing mechanisms or dual stations, cutting cycle time in half while maintaining precise synchronization.
Anti-Rotation Slides
The dual-rod guidance inherently resists torsional twist on heavy machining slides, eliminating the need for external linear rails in specific high-mass tasks.
Is the Airtac SAID200 Double Rod Cylinder SAID200AX1000S the Right Cylinder?
Choose this 200 mm bore when an application requires massive equal bidirectional force that a smaller bore cannot provide, such as replacing a 160 mm bore that only generates 9425 N at 0.5 MPa. The twin-rod design is selected over a single-rod SAI when the mechanism demands dual-side guidance to prevent rotation, or when rear-rod sensing is required. The PT tapered port threads ensure a robust, leak-free pneumatic connection.
Because the 1000 mm stroke is substantial, the long unsupported rod is highly susceptible to side-load bending and rod-bearing wear. For this length, incorporating an external guide rail to support the load is strongly recommended. Remember that the adjustable cushions only decelerate the piston near stroke end; they do not hold the load. If position holding without live air pressure is required, consider a SAIL lock, BSAID clamp-lock, or an external pilot-operated check valve. This cylinder is dimensionally interchangeable per ISO 15552, serving as a drop-in replacement for other ISO 15552 double-rod cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID200 Double Rod Cylinder SAID200AX1000S FAQ
Because it is a double-rod cylinder, the push and pull forces are identical. It delivers 15079 N at 0.5 MPa, 21110 N at 0.7 MPa, and 27141 N at 0.9 MPa in both directions.
The SAID series uses a reduced mounting set compared to single-rod SAI cylinders: Basic, FA, LB, TC, FTC, TCM1, and TCM2. It omits FB, CA, CB, and CR brackets due to the rear rod protrusion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAID200 Double Rod Cylinder SAID200AX1000S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.