Airtac SAID200 Double Rod Cylinder SAID200AX100S
The AirTAC Airtac SAID200 Double Rod Cylinder SAID200AX100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 100mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ200 mm
- Stroke100 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
About the Airtac SAID200 Double Rod Cylinder SAID200AX100S
The AirTAC SAID200X100-S is a double-acting, double-rod ISO 15552 profile cylinder engineered for heavy-duty symmetrical actuation. Because a stainless steel SUS420J2 rod exits both end covers, the annulus area is identical on each side, generating an equal 15079 N of force in both extend and retract directions at 0.5 MPa. This through-rod geometry provides superior anti-rotation stability and allows a secondary mechanism or position flag to be driven from the rear.
Equipped with a piston magnet (-S), this 200mm bore variant directly supports AirTAC CMSE reed and DMSE electronic solid-state sensors mounted along the dual-side extruded barrel grooves. It features adjustable air cushioning at both ends to decelerate massive loads and uses PT tapered port threads matched to the G3/4 porting standard.
Airtac SAID200 Double Rod Cylinder SAID200AX100S Technical Specifications
| Model | Airtac SAID200 Double Rod Cylinder SAID200AX100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID200 Double Rod Cylinder SAID200AX100S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID200 Double Rod Cylinder SAID200AX100S Is Used
Symmetric Press Actuation
Provides perfectly balanced 15079 N clamping force on both the extend and retract strokes, ideal for heavy-duty press operations requiring identical push and pull energy.
Dual-Station Transfer
Drives two separate workpiece stations simultaneously using both rod ends, ensuring perfectly synchronized movement without needing a secondary cylinder.
Anti-Rotation Heavy Slide
The twin-rod architecture inherently resists torsional twisting under massive offset loads, guiding heavy industrial slides with high lateral stability.
Is the Airtac SAID200 Double Rod Cylinder SAID200AX100S the Right Cylinder?
Selecting this 200mm bore model is ideal when an application demands immense bidirectional force that a single-rod SAI cannot symmetrically provide. If your mechanism requires less force, stepping down to the 160mm bore yields 9425 N both ways at 0.5 MPa, whereas staying with the SAID200X100-S guarantees maximum push-pull equality. Remember that a plain double-rod cylinder drifts when air pressure is lost; the integrated air cushions only decelerate the piston near stroke end and do not function as a locking brake. For dead-load holding, consider an external pilot-operated check valve or the BSAID clamp-lock variant.
As a dimensionally interchangeable ISO 15552 profile cylinder, it serves as a drop-in replacement for other standard double-rod actuators. To match your setup exactly, specify the 100mm stroke, G3/4 port with PT threads, and the appropriate mounting accessory from the SAID subset: Basic, FA, LB, TC, FTC, TCM1, or TCM2. Although the 100mm stroke is relatively short, the massive 40mm rod diameter handles high side loads, though external guidance is always recommended for optimal bearing life.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID200 Double Rod Cylinder SAID200AX100S FAQ
Because the double-rod design creates equal piston areas on both sides, the output force is identical in both directions. It provides 15079 N at 0.5 MPa, 21110 N at 0.7 MPa, and 27141 N at 0.9 MPa.
Yes, the SAID200X100-S is a true ISO 15552 profile cylinder, making its mounting interface dimensionally interchangeable with other standard ISO 15552 double-rod cylinders. Ensure you use the SAID mounting subset (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAID200 Double Rod Cylinder SAID200AX100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.