Airtac SAID200 Double Rod Cylinder SAID200AX10S
The AirTAC Airtac SAID200 Double Rod Cylinder SAID200AX10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 10mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ200 mm
- Stroke10 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
About the Airtac SAID200 Double Rod Cylinder SAID200AX10S
The AirTAC SAID200X10-S is a double-acting, double-rod ISO 15552 profile cylinder engineered for high-force, short-stroke symmetry. Because a rod exits both end covers, the annulus area is identical on extend and retract, yielding an equal 15079 N of force in both directions at 0.5 MPa. This specific configuration features a SUS420J2 stainless steel rod and a built-in magnet for position sensing.
With a 10 mm stroke, this made-to-order variant excels in compact clamping or indexing tasks. The twin-rod architecture provides superior anti-rotation resistance and allows a rear cam or position flag to be mounted on the secondary rod end. Sensor grooves on both sides of the extruded aluminum barrel accommodate CMSE reed or DMSE electronic switches.
Airtac SAID200 Double Rod Cylinder SAID200AX10S Technical Specifications
| Model | Airtac SAID200 Double Rod Cylinder SAID200AX10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID200 Double Rod Cylinder SAID200AX10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID200 Double Rod Cylinder SAID200AX10S Is Used
Symmetric Heavy Clamping
Provides perfectly balanced 15079 N clamping force in both directions, ideal for securing heavy workpieces without rotational drift.
Twin-Station Actuation
Drives two separate mechanisms simultaneously from a single piston, using the front rod for the primary work and the rear rod for secondary ejection.
Rear-End Position Sensing
Mounts a cam or sensor flag on the protruding rear rod to trigger DMSE electronic switches in space-constrained compact machinery.
Is the Airtac SAID200 Double Rod Cylinder SAID200AX10S the Right Cylinder?
Select this 200 mm bore cylinder when an application requires massive, perfectly balanced force across a very short 10 mm travel. If you need less force, stepping down to the 160 mm bore drops the both-way output to 9425 N at 0.5 MPa. The SAID200X10-S is chosen over a single-rod SAI when dual-side guidance, anti-rotation stability, or rear-rod sensing is mandatory. Note that this cylinder does not hold its position if air pressure is lost; for dead-load holding, consider an external rod lock or the BSAID clamp-lock variant.
As a true ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 double-rod cylinders. To match this exact unit, specify the 200 mm bore, 10 mm stroke, PT tapered port (G3/4), and the -S magnet option. Mounting options are limited to the SAID subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID200 Double Rod Cylinder SAID200AX10S FAQ
Because it is a double-rod cylinder, the force is equal in both directions. It provides 15079 N at 0.5 MPa, 21110 N at 0.7 MPa, and 27141 N at 0.9 MPa.
Yes, it is an extruded aluminum profile cylinder with standard ISO 15552 mounting dimensions, making it a drop-in replacement for other ISO 15552 double-rod cylinders. It uses PT G3/4 ports and a SUS420J2 stainless steel rod.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAID200 Double Rod Cylinder SAID200AX10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.