
The AirTAC SAID200 Double Rod Cylinder SAID200AX15 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 15mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID200X15 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 200 mm bore and 15 mm stroke. Because the piston rod extends through both end covers, the annulus area is identical on both sides, yielding equal push and pull forces of 15079 N at 0.5 MPa. This symmetric thrust is essential for mechanisms requiring perfectly balanced motion in both directions.
This configuration uses a SUS420J2 stainless steel rod (material code A) for enhanced corrosion resistance and features PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. Note that the rear rod protrudes from the back cover, so you must account for this extra clearance in your machine design to prevent end-of-stroke collisions.
| Model | Airtac SAID200 Double Rod Cylinder SAID200AX15 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Delivers identical 15079 N clamping force on both extend and retract strokes for precision manufacturing presses requiring balanced bidirectional pressure.
Drives two linked workstations simultaneously from a single actuator, using both rod ends to move parallel mechanisms in perfect synchronization.
The dual through-rods prevent mechanical twist and rotation on heavy-duty linear slides, ensuring rigid guidance for heavy payloads.
Choose this 200 mm bore size when an application demands massive symmetric force that smaller bores cannot provide. If 15079 N at 0.5 MPa is excessive, stepping down to the 160 mm bore yields 9425 N both ways. The twin-rod design is selected over a single-rod SAI when the mechanism requires dual-side guidance to prevent rotation, or when a rear-position cam and flag are needed to trigger external limit switches.
This cylinder uses a PT port thread and the standard ISO 15552 mounting interface. It does not hold a load when air pressure is lost; if your application requires dead-stop positioning without live pressure, consider an external pilot-operated check valve or the BSAID clamp-lock variant. Because the stroke is short, side-load stress on the rod bearing is minimal, but always ensure the workpiece is guided externally for optimal bearing life.
Quick checklist
Because it is a double-rod cylinder, the effective area is the same on both sides. It delivers 15079 N of force in both extend and retract directions at 0.5 MPa, and 27141 N at 0.9 MPa.
Yes, the SAID200X15 is dimensionally interchangeable per ISO 15552 mounting interfaces. You can use it as a direct replacement for other ISO 15552 double-rod profile cylinders without altering the mounting footprint.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.