verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAID200 Double Rod Cylinder SAID200AX170

The AirTAC SAID200 Double Rod Cylinder SAID200AX170 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 170mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ200 mm
  • Stroke170 mm
  • Port sizeG3/4
  • Acting typeDouble acting
  • Rod threadM36×2
  • CushionAdjustable, 50 mm
$758.83 $766.33 Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAID200 stroke, mounting and version on one page All SAID200 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAID200 Double Rod Cylinder SAID200AX170

The AirTAC SAID200X170 is a double-acting, double-rod profile cylinder conforming to ISO 15552 dimensions. A single piston drives a rod out of both end covers, yielding equal extend and retract forces. It generates 15079 N of thrust in each direction at 0.5 MPa, operating within a 30-500 mm/s speed range.

This specific configuration features a SUS420J2 stainless steel rod (material code A) for enhanced corrosion resistance and includes PT tapered port threads. The extruded aluminum barrel integrates sensor grooves on both sides, allowing you to mount position flags or CMSE reed and DMSE electronic switches along either rod end.

Airtac SAID200 Double Rod Cylinder SAID200AX170 Technical Specifications

ModelAirtac SAID200 Double Rod Cylinder SAID200AX170
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ200 mm
Stroke170 mm
Acting typeDouble acting
Port sizeG3/4
Rod threadM36×2
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionAdjustable, 50 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø200mm)

PressurePush forcePull force
0.5 MPa15080 N15080 N
0.7 MPa21111 N—
Max (@1.0 MPa)3075 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAID200 Double Rod Cylinder SAID200AX170

SAIISO 15552 profile-barrel cylinder series.
200Bore size in mm.
×170Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAID200 Double Rod Cylinder SAID200AX170 Is Used

precision_manufacturing

Anti-Rotation Heavy Slide

Twin rods prevent mechanical rotation during heavy press operations, ensuring perfectly straight vertical movement under high loads.

sync_alt

Dual-Station Transfer

Drives two synchronized mechanisms simultaneously from one piston, using the front rod for the primary workpiece and the rear for a secondary action.

factory

Symmetric Force Clamping

Provides identical 15079 N clamping force in both extend and retract directions, ideal for reversible clamping fixtures requiring equal pressure.

Is the Airtac SAID200 Double Rod Cylinder SAID200AX170 the Right Cylinder?

Select this 200 mm bore when an application demands symmetric force and dual-side guidance, stepping up from the 160 mm bore which provides 9425 N both ways at 0.5 MPa. The twin-rod architecture is ideal for preventing rotation in heavy slides or driving twin stations simultaneously, whereas a single-rod SAI cylinder only offers rear-end sensing and asymmetric push-pull dynamics.

At a 170 mm stroke, the rear rod protrudes significantly, so verify your longitudinal clearance. Remember that a plain SAID does not hold its load when air pressure is lost; if fail-safe locking is required, consider the BSAID clamp-lock variant. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR).

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAID200 Double Rod Cylinder SAID200AX170 FAQ

Because the rod area is subtracted on both sides, the SAID200X170 provides equal force in both directions. It delivers 15079 N at 0.5 MPa, 21110 N at 0.7 MPa, and 27141 N at 0.9 MPa.

Yes, the SAID200X170 is dimensionally interchangeable per ISO 15552 profile cylinder standards. It uses a G3/4 port and supports mounting accessories like FA, LB, and TC, making it a direct replacement for other ISO 15552 double-rod cylinders.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAID200 Double Rod Cylinder SAID200AX170

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAID200AX170 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.