
The AirTAC SAID200 Double Rod Cylinder SAID200AX175 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 175mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID200X175 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 200 mm bore and 175 mm stroke. Because a rod exits both end covers, the annulus area is identical on extend and retract, yielding equal force and speed in both directions. This model generates 15079 N each way at 0.5 MPa and 21110 N at 0.7 MPa.
Equipped with SUS420J2 stainless steel rods and PT tapered G3/4 ports, it offers superior corrosion resistance for demanding environments. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. Note that the rear rod protrudes from the back cover, requiring additional clearance in your machine layout.
| Model | Airtac SAID200 Double Rod Cylinder SAID200AX175 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Utilizes the equal 15079 N force in both directions to perform high-tonnage pressing and forming operations identically on extend and retract strokes.
Drives two synchronized workstations simultaneously by mounting tooling on both rod ends, ensuring perfectly balanced actuation across the assembly line.
Leverages the dual-rod guidance to completely prevent piston rotation, providing precise linear indexing for heavy-duty material handling systems.
Choose this 200 mm bore size when you need massive equal-force thrust that a smaller bore cannot provide, or step down to a 160 mm bore if your application requires less than 9425 N at 0.5 MPa. The twin-rod design is selected over a single-rod SAI when the mechanism requires dual-side guidance to prevent rotation, or when a rear cam and position flag must drive a secondary mechanism.
This cylinder is dimensionally interchangeable per ISO 15552, making it a direct replacement for other ISO 15552 double-rod cylinders. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2. Be aware that a plain SAID does not hold its load when air is lost; if position holding is required without live pressure, consider an external rod lock or a BSAID clamp-lock cylinder. The 175 mm stroke is under the 300 mm threshold, so standard rod bearing support is sufficient without external guides.
Quick checklist
The SAID200X175 delivers equal force in both extend and retract directions due to the double-rod design. It outputs 15079 N at 0.5 MPa, 21110 N at 0.7 MPa, and 27141 N at 0.9 MPa.
Yes, the SAID200X175 is a true ISO 15552 profile cylinder, making it dimensionally interchangeable with other ISO 15552 double-rod cylinders. It uses a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.