
The AirTAC SAID200 Double Rod Cylinder SAID200AX20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 20mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID200X20-S is a double-acting, double-rod ISO 15552 profile cylinder engineered for high-force symmetric motion. A single piston drives a rod out of both end covers, yielding an identical annulus effective area on extend and retract. This design delivers 15079 N of force in both directions at 0.5 MPa, ensuring perfectly balanced thrust and speed for demanding transfer operations.
Equipped with a -S magnet, this unit directly supports AirTAC CMSE reed and DMSE solid-state electronic sensors housed within the dual-side barrel grooves. The rod is manufactured from SUS420J2 stainless steel (option A) for superior corrosion resistance, and fluid connections use a PT tapered G3/4 port. The adjustable air cushion at both ends decelerates the piston near stroke end, though it does not lock or hold the load if air pressure is lost.
| Model | Airtac SAID200 Double Rod Cylinder SAID200AX20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Delivers 15079 N of equal thrust in both directions for high-tonnage pressing, stamping, and forming operations that require stable bidirectional force.
The through-rod drives a primary workpiece on the front end while simultaneously actuating a secondary mechanism or position flag on the rear, synchronizing two stations.
Dual-ended rod support prevents piston rotation and handles high side loads better than a single-rod design, ideal for heavy-duty lifting and guided sliding.
Select this 200 mm bore cylinder when an application requires massive bidirectional force that a single-rod SAI cannot symmetrically provide. Stepping down to a 160 mm bore reduces the both-way output to 9425 N at 0.5 MPa, while the 200 mm bore is required for heavy 15079 N equal thrust tasks. The through-rod configuration is specifically chosen when you need to mount a position flag, cam, or secondary mechanism on the rear extension while driving the primary load on the front, providing superior anti-rotation guidance.
As a dimensionally interchangeable ISO 15552 profile cylinder, it serves as a direct replacement for other ISO 15552 double-rod cylinders. It utilizes the reduced SAID mounting accessory set: Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR brackets reserved for single-rod variants. Because the rear rod protrudes from the back cover, ensure you leave adequate clearance in your machine layout. If the application must hold a load without live pressure, pair this cylinder with an external rod lock or pilot-operated check valve, or explore the BSAID clamp-lock series.
Quick checklist
Because the double-rod design subtracts the rod area from both sides of the piston, the extend and retract forces are equal. It provides 15079 N both ways at 0.5 MPa, 21110 N at 0.7 MPa, and 27141 N at 0.9 MPa.
Yes. The SAID200X20-S is an extruded aluminum profile cylinder with a standard ISO 15552 mounting interface, making it dimensionally interchangeable with other ISO 15552 double-rod cylinders. It uses the PT G3/4 port and supports CMSE/DMSE sensors via the -S magnet.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.