
The AirTAC SAID200 Double Rod Cylinder SAID200AX250 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 250mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID200X250 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 200 mm bore and 250 mm stroke. Because a rod exits both ends, the annulus area is identical on both sides, yielding an equal extend and retract force of 15079 N at 0.5 MPa. It is dimensionally interchangeable per ISO 15552, serving as a direct replacement for other ISO 15552 double-rod cylinders.
This variant features a SUS420J2 stainless steel rod (material code A) for enhanced corrosion resistance. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting. A rear rod protrusion requires extra clearance but allows a second mechanism or position flag to be driven independently.
| Model | Airtac SAID200 Double Rod Cylinder SAID200AX250 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 250 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives heavy material handling carts with identical push and pull thrust, ensuring consistent momentum control in both directions.
Uses the twin-rod geometry to guide heavy industrial platens, preventing torsional twist without needing external guide rails.
Mounts a heavy-duty cam or position flag on the rear rod end to trigger external limit switches while the front rod performs the work.
Select this 200 mm bore model when an application demands massive symmetric force, as it provides 15079 N in both directions at 0.5 MPa. Stepping down to a 160 mm bore reduces the both-way output to 9425 N, while staying at 200 mm is necessary for heavy twin-station actuation. Unlike a single-rod SAI, this double-rod design inherently resists torsional loads and keeps the workpiece guided against rotation.
This cylinder uses PT tapered port threads and a G3/4 port size. It supports the reduced SAID mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR accessories. Note that a plain SAID does not hold its load when air is lost; the piston drifts. For dead-end holding without live pressure, consider an external rod lock, a pilot-operated check valve, or the BSAID clamp-lock variant. Although the 250 mm stroke is below the 1500 mm standard maximum, the substantial 40 mm rod diameter still necessitates external guidance for heavy loads to prevent rod-bearing bending under side-load.
Quick checklist
Because the rod area is subtracted on both sides, the push and pull forces are equal. It generates 15079 N at 0.5 MPa, 21110 N at 0.7 MPa, and 27141 N at 0.9 MPa in both directions.
Yes. It is a true ISO 15552 profile cylinder, making it dimensionally interchangeable with other ISO 15552 double-rod cylinders. It uses the standard SAID mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits single-rod-only mounts like FB and CA.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.