
The AirTAC SAID200 Double Rod Cylinder SAID200AX325S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 325mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID200X325-S is a double-acting, double-rod ISO 15552 profile cylinder engineered for symmetric actuation. A single piston drives a rod out of both end covers, yielding an identical annulus area on each side. This design delivers an equal push and pull force of 15079 N at 0.5 MPa in both directions, preventing speed discrepancies between extend and retract strokes.
Configured with a SUS420J2 stainless steel rod (option A) and a -S magnet, this unit supports AirTAC CMSE reed and DMSE solid-state sensors via the dual-side extruded barrel grooves. The PT tapered port threads ensure a tight pneumatic seal, while the through-rod architecture provides exceptional anti-rotation guidance for heavy loads.
| Model | Airtac SAID200 Double Rod Cylinder SAID200AX325S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 325 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×325 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives heavy workpieces with identical 15079 N force extending and retracting, ensuring balanced momentum control on precision manufacturing lines.
Uses the rear rod end to operate a secondary mechanism or position flag simultaneously, synchronizing two separate workstations from one cylinder.
The through-rod construction keeps the load guided against rotational torque better than a single rod, maintaining strict alignment on heavy slides.
Selecting this 200 mm bore over a 160 mm neighbor steps the bidirectional force up from 9425 N to 15079 N at 0.5 MPa, matching the demands of heavy symmetric transfer. A twin-rod format is chosen when a mechanism requires a rear-rod output for a secondary cam, position flag, or dual-station actuation, unlike a single-rod SAI.
At 325 mm stroke, the long unsupported rod length increases side-load stress on the rod bearing, making an external guide rail advisable to prevent bending. Remember that the adjustable air cushion only decelerates the piston near stroke end; it does not hold the load if air pressure drops. For dead-end holding, integrate a SAIL lock, BSAID clamp-lock, or external pilot-operated check valve.
Quick checklist
Because the rod occupies both sides of the piston, the effective area is identical in both directions. It provides an equal push and pull force of 15079 N at 0.5 MPa, 21110 N at 0.7 MPa, and 27141 N at 0.9 MPa.
Yes, the SAID profile barrel is dimensionally interchangeable per ISO 15552 mounting interfaces. It uses the reduced SAID mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits the FB, CA, CB, and CR brackets found on single-rod variants.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.