
The AirTAC SAID200 Double Rod Cylinder SAID200AX650 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 650mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID200X650 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 200 mm bore and 650 mm stroke. Because the twin rods occupy both sides of the piston, the annulus area is identical in each direction, yielding an equal extend and retract force of 15079 N at 0.5 MPa. A rod protrudes from both end covers simultaneously.
This unit is equipped with a SUS420J2 stainless steel rod (material code A) for superior corrosion resistance and features PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of position switches. It is dimensionally interchangeable per ISO 15552, serving as a direct replacement for other ISO 15552 double-rod cylinders.
| Model | Airtac SAID200 Double Rod Cylinder SAID200AX650 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 650 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×650 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Prevents platform rotation during heavy horizontal transfer by guiding the load on both rod ends simultaneously.
Drives heavy pallets with identical 15079 N push and pull thrust, ensuring consistent deceleration across the cycle.
Mounts a cam or target flag on the rear rod to trigger external sensors without interfering with the primary work tool.
Choose this 200 mm bore when an application requires symmetric thrust and anti-rotation guidance, stepping up from the 160 mm bore which provides 9425 N at 0.5 MPa. The double-rod design is essential when you need to drive a primary workpiece on one end while mounting a cam, position flag, or secondary mechanism on the rear rod. It uses the reduced SAID mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting FB, CA, CB, and CR accessories found on single-rod variants.
At 650 mm of travel, the unsupported mass increases bending stress on the rod bearings; utilize an external guide to handle side loads. Note that a plain SAID does not hold its load when air is lost or exhausted—the piston drifts. For fail-safe holding without live pressure, consider an AirTAC SAIL, BSAID, or an external rod lock.
Quick checklist
The SAID200X650 delivers an equal force in both extend and retract directions due to its double-rod design. It provides 15079 N at 0.5 MPa, 21110 N at 0.7 MPa, and 27141 N at 0.9 MPa.
Yes. The SAID200X650 is a true ISO 15552 profile cylinder, making its mounting interface dimensionally interchangeable with other ISO 15552 double-rod cylinders for seamless direct replacement.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.