verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAID200 Double Rod Cylinder SAID200AX70S

The AirTAC SAID200 Double Rod Cylinder SAID200AX70S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 70mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ200 mm
  • Stroke70 mm
  • Port sizeG3/4
  • Acting typeDouble acting
  • Rod threadM36×2
  • CushionAdjustable, 50 mm
$656.00 $663.50Save 1% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAID200 stroke, mounting and version on one page All SAID200 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAID200 Double Rod Cylinder SAID200AX70S

The AirTAC SAID200X70-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 200mm bore and 70mm stroke. Because the piston rod exits both end covers, the annular area is identical on both sides, yielding an equal extend and retract force of 15079 N at 0.5 MPa. This symmetric thrust is ideal for mechanisms requiring perfectly balanced push and pull dynamics.

This variant includes a -S magnet for position sensing and uses a SUS420J2 stainless steel rod (material code A) for enhanced corrosion resistance. The rear rod extension can drive a secondary mechanism or mount a position flag, while the extruded aluminum barrel integrates sensor grooves on both sides for flexible CMSE or DMSE switch mounting.

Airtac SAID200 Double Rod Cylinder SAID200AX70S Technical Specifications

ModelAirtac SAID200 Double Rod Cylinder SAID200AX70S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ200 mm
Stroke70 mm
Acting typeDouble acting
Port sizeG3/4
Rod threadM36×2
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionAdjustable, 50 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø200mm)

PressurePush forcePull force
0.5 MPa15080 N15080 N
0.7 MPa21111 N—
Max (@1.0 MPa)3075 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAID200 Double Rod Cylinder SAID200AX70S

SAIISO 15552 profile-barrel cylinder series.
200Bore size in mm.
×70Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAID200 Double Rod Cylinder SAID200AX70S Is Used

precision_manufacturing

Symmetric Pressing

Provides 15079N of equal force in both directions, ensuring perfectly balanced clamping and release forces on heavy stamping or forming presses.

sync_alt

Dual-Side Transfer

Drives twin mechanisms simultaneously from a single actuator, using the protruding rear rod to operate a secondary conveyor or indexing station.

straighten

Anti-Rotation Slides

The through-rod configuration keeps heavy loads guided and prevents rotational drift during vertical or horizontal lifting movements.

Is the Airtac SAID200 Double Rod Cylinder SAID200AX70S the Right Cylinder?

Select this 200mm bore when an application demands immense bidirectional force, stepping up significantly from the 160mm bore which provides 9425 N at 0.5 MPa. The double-rod design is chosen over a single-rod SAI when the mechanism requires dual-side guidance to prevent rotation, or when a rear rod is needed to trigger external limit flags. Note that a plain SAID does not hold its load if air pressure is lost; for dead-drop prevention, consider a SAIL or BSAID clamp-lock variant.

This model uses PT tapered port threads and operates at 30-500 mm/s. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct replacement for other ISO 15552 double-rod cylinders. Ensure you specify the correct mounting accessory from the SAID set: Basic, FA, LB, TC, FTC, TCM1, or TCM2.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAID200 Double Rod Cylinder SAID200AX70S FAQ

The SAID200X70-S provides an equal force of 15079 N at 0.5 MPa, 21110 N at 0.7 MPa, and 27141 N at 0.9 MPa in both the extend and retract directions, as the twin rods create matching annular areas.

Yes, the SAID200X70-S is an extruded aluminum profile cylinder built to the ISO 15552 mounting interface, making it dimensionally interchangeable with other ISO 15552 double-rod cylinders.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAID200 Double Rod Cylinder SAID200AX70S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAID200AX70S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.