
The AirTAC SAID200 Double Rod Cylinder SAID200AX850 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 850mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID200X850 is a double-acting, double-rod profile cylinder adhering to the ISO 15552 mounting interface. Because a piston rod exits both end covers, the effective annulus area is identical on extension and retraction. This geometry yields exactly 15079 N of thrust and pull force at 0.5 MPa, ensuring perfectly symmetric dynamics for heavy loads.
This specific configuration features a 40 mm SUS420J2 stainless steel rod for enhanced corrosion resistance, PT tapered port threads, and adjustable air cushions at both ends. The extruded aluminum barrel includes dual sensor grooves, allowing you to mount position flags or CMSE / DMSE switches on either side to track the rear rod extension.
| Model | Airtac SAID200 Double Rod Cylinder SAID200AX850 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 850 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×850 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives heavy industrial presses requiring identical push and pull forces, utilizing the 15079 N both-way capability to move large masses without speed differential.
Mounts a primary work tool on the front rod and a secondary mechanism on the rear, operating two synchronized stations simultaneously from one cylinder body.
Keeps heavy guided loads from twisting during long 850 mm strokes, using the twin rods exiting both ends to maintain strict linear alignment.
Select this 200 mm bore when an application demands immense bidirectional force that a single-rod SAI cannot balance. If the 15079 N output at 0.5 MPa exceeds your payload, stepping down to the 160 mm bore yields 9425 N under the same pressure. At an 850 mm stroke, the unsupported piston length is substantial; the 40 mm rod provides rigidity, but you must use an external guide to prevent rod-bearing bending under heavy side loads.
Choose the twin-rod layout when you need to drive a primary workpiece on one end while mounting a cam, secondary tool, or position flag on the rear. Remember that the adjustable cushion only decelerates the piston near stroke end; it does not lock the load. If the mechanism must hold position without live air pressure, integrate a SAIL lock, a BSAID clamp-lock, or an external pilot-operated check valve. This unit is dimensionally interchangeable per ISO 15552, using the Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounting set.
Quick checklist
Because the rod occupies both sides of the piston, the effective area is identical in both directions. It delivers 15079 N of force at 0.5 MPa, 21110 N at 0.7 MPa, and 27141 N at 0.9 MPa on both extend and retract strokes.
Yes. The SAID200X850 is a profile cylinder with ISO 15552 mounting dimensions, making it a direct replacement for other ISO 15552 double-rod cylinders. It uses the standard SAID mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits single-rod only brackets.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.