
The AirTAC SAID200 Double Rod Cylinder SAID200BX100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 100mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID200X100-S is a double-acting, double-rod ISO 15552 profile cylinder engineered for heavy-duty symmetrical motion. A single piston drives a SUS304 stainless steel rod out of both end covers, yielding an identical effective annulus area on extend and retract. This design delivers an equal 15079 N of force in both directions at 0.5 MPa, preventing the speed and force disparities found in single-rod units.
Because a rod protrudes from the rear cover, you can mount a position flag or secondary mechanism on the opposite end while driving the primary load up front. The extruded aluminum barrel includes sensor grooves on both sides, and the integrated -S magnet interfaces directly with AirTAC CMSE reed and DMSE solid-state switches for precise end-of-stroke detection. Adjustable air cushions at both ends decelerate the piston smoothly.
| Model | Airtac SAID200 Double Rod Cylinder SAID200BX100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives heavy stamping or forming tools where equal push and pull forces are required to maintain precise load balance throughout the cycle.
Uses the through-rod design to drive a primary workpiece on the front end while simultaneously moving a secondary mechanism or cam on the rear.
Keeps heavy guided loads from twisting during transfer, using the dual-ended rod configuration for superior stability over single-rod actuators.
Select this 200 mm bore when an application demands massive bidirectional force, stepping up from a 160 mm bore that provides 9425 N at 0.5 MPa. The double-rod architecture is chosen over a single-rod SAI when the load requires strict anti-rotation guidance or dual-side actuation. Although the 100 mm stroke is short, the 40 mm rod diameter provides substantial rigidity; for any stroke of 300 mm or more, an external guide is mandatory to prevent rod-bearing bending under heavy side loads.
This cylinder is dimensionally interchangeable per ISO 15552, serving as a direct replacement for other ISO 15552 double-rod cylinders. Specify the 100 mm stroke, G3/4 PT tapered ports, and your preferred mounting accessory from the SAID set: Basic, FA, LB, TC, FTC, TCM1, or TCM2. Note that plain SAID cylinders do not hold position without live air pressure; if load holding is required during pressure loss, consider an external rod lock or the BSAID clamp-lock variant.
Quick checklist
Because the rod occupies both sides of the piston, the effective area is identical in both directions. It provides 15079 N of force at 0.5 MPa, 21110 N at 0.7 MPa, and 27141 N at 0.9 MPa for both extend and retract strokes.
Yes, it is dimensionally interchangeable with ISO 15552 profile cylinders. It supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts (omitting FB/CA/CB/CR). The built-in magnet works seamlessly with AirTAC CMSE reed and DMSE electronic sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.