
The AirTAC SAID200 Double Rod Cylinder SAID200BX450 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 450mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID200X450 is a double-acting, double-rod ISO 15552 profile cylinder engineered for heavy-duty symmetric motion. Because the piston rod occupies both ends, the annulus area is identical on extend and retract, yielding an equal 15079 N of force each way at 0.5 MPa. This through-rod architecture keeps the load guided against rotation far better than a single-rod unit.
This specific configuration features SUS304 stainless steel rods for superior corrosion resistance and uses PT tapered port threads. You can mount the primary workpiece on the front rod end and drive a second mechanism or position flag from the rear. Note that the rear rod protrudes continuously, requiring extra clearance behind the rear cover.
| Model | Airtac SAID200 Double Rod Cylinder SAID200BX450 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a heavy press with identical 15079 N extend and retract forces at 0.5 MPa, ensuring consistent material forming on both strokes without force imbalance.
Actuates two linked workstations simultaneously using both rod ends, with the rear rod providing synchronized motion to a secondary assembly mechanism.
Guides a massive 450 mm stroke linear slide where the dual rods prevent torsional deflection, maintaining precise alignment under high side-loading.
Select this 200 mm bore when an application demands substantial bidirectional force (15079 N at 0.5 MPa, scaling to 27141 N at 0.9 MPa) that remains perfectly balanced. If your process requires less force, stepping down to the 160 mm bore drops the both-way output to 9425 N at 0.5 MPa. Unlike a single-rod SAI cylinder, the SAID200X450 provides dual-side guidance and allows rear-end sensing via CMSE or DMSE switches, though you must specify the -S magnet option if electronic or reed sensing is needed.
With a 450 mm stroke, the 40 mm diameter rods and M36x2 threads carry high side loads, but the extended length means you should use an external guide to prevent rod-bearing bending. This cylinder is dimensionally interchangeable per ISO 15552, offering a direct replacement for other ISO 15552 double-rod cylinders. It uses PT ports, accepts mounting accessories from the SAID set (Basic, FA, LB, TC, FTC, TCM1, TCM2), and operates at 30-500 mm/s. Remember that a plain SAID does not hold position when air is lost; for dead-load holding, consider an external rod lock or the BSAID clamp-lock variant.
Quick checklist
Because it is a double-rod cylinder, the force is equal in both directions. It provides 15079 N at 0.5 MPa, 21110 N at 0.7 MPa, and 27141 N at 0.9 MPa on both extend and retract strokes.
Yes, the SAID200X450 is dimensionally interchangeable per ISO 15552 and serves as a direct replacement for other ISO 15552 double-rod profile cylinders. It uses PT ports and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.