
The AirTAC SAID200 Double Rod Cylinder SAID200BX50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 50mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID200X50 is a double-acting, double-rod ISO 15552 profile cylinder engineered for heavy-duty symmetric actuation. Because the SUS304 stainless steel rod exits both end covers, the annulus area is identical on extend and retract, yielding exactly 15079 N of force in both directions at 0.5 MPa. This through-rod geometry provides superior anti-rotation stability and allows a secondary mechanism or position flag to be driven from the rear.
Fluid is filtered air operating between 0.15-1.0 MPa, with adjustable air cushions at both ends to decelerate the massive 200 mm piston smoothly. The extruded aluminum barrel features sensor grooves on both sides for flexible switch placement. If your process loses pressure, note that this cylinder will drift and cannot hold a load without an external pilot-operated check valve or a related locking type like BSAID.
| Model | Airtac SAID200 Double Rod Cylinder SAID200BX50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Applies 15079 N of identical force extending and retracting to form thick metal components while maintaining strict parallelism via dual-rod guidance.
Drives a heavy workpiece across a station using both rod ends to keep the payload perfectly balanced and resistant to torsional deflection.
Mounts the primary work tool on the front rod end and a secondary cam or mechanical flag on the rear rod to operate external limit valves.
Select this 200 mm bore model when an application demands immense equal bidirectional force, stepping up significantly from the 160 mm bore (which provides 9425 N at 0.5 MPa). The twin-rod architecture is chosen over a single-rod SAI when the load requires dual-side guidance to prevent twisting, or when a rear cam must trigger a remote sensor. It utilizes a PT tapered port thread and a reduced mounting accessory set comprising Basic, FA, LB, TC, FTC, TCM1, and TCM2.
For a 50 mm stroke, the side-load leverage is minimal compared to longer travels, but the sheer mass of the 40 mm diameter rod still requires robust external guiding for any heavy off-center payload. As a dimensionally interchangeable ISO 15552 profile cylinder, it serves as a direct replacement for other standard double-rod cylinders without requiring custom footprint machining.
Quick checklist
Because the rod occupies both sides of the piston, the push and pull forces are equal. It delivers 15079 N in both directions at 0.5 MPa, 21110 N at 0.7 MPa, and 27141 N at 0.9 MPa.
Yes, it is a true ISO 15552 profile cylinder, making its mounting interface dimensionally interchangeable with other ISO 15552 double-rod cylinders. It uses a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.