Airtac SAID200 Double Rod Cylinder SAID200X150
The AirTAC Airtac SAID200 Double Rod Cylinder SAID200X150 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 150mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ200 mm
- Stroke150 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID200 Double Rod Cylinder SAID200X150
The AirTAC SAID200X150 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 200mm bore and 150mm stroke. A single piston drives a carbon steel rod out of both end covers, yielding an annulus area that is identical on extend and retract. This symmetry provides an equal both-way force of 15079 N at 0.5 MPa, ensuring perfectly balanced motion for heavy transfer tasks.
Because the rod protrudes from the rear cover, you can mount a position flag or cam on the opposite end to trigger CMSE or DMSE sensors in the dual side grooves. The extruded aluminum barrel design omits tie-rods, and the adjustable air cushions at both ends decelerate the piston near stroke end without acting as a lock. For applications requiring position holding upon air loss, consider the SAIL or BSAID variants instead.
Airtac SAID200 Double Rod Cylinder SAID200X150 Technical Specifications
| Model | Airtac SAID200 Double Rod Cylinder SAID200X150 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID200 Double Rod Cylinder SAID200X150
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID200 Double Rod Cylinder SAID200X150 Is Used
Symmetric Heavy Transfer
Moves large machinery components with equal 15079N thrust in both directions, preventing jerky uneven acceleration in automated heavy transfer lines.
Anti-Rotation Guiding
Utilizes the twin through-rods to keep heavy sliding loads perfectly aligned and resistant to torsional twist during vertical lifting operations.
Dual-Station Actuation
Drives a primary workpiece on the front rod end while the rear rod end operates a secondary mechanism or position flag simultaneously.
Is the Airtac SAID200 Double Rod Cylinder SAID200X150 the Right Cylinder?
Select this 200mm bore when a 160mm cylinder (9425 N at 0.5 MPa) lacks the thrust for moving substantial masses, but you must supply clean air filtered to 40 um and manage the physical envelope. The twin-rod architecture is chosen over a single-rod SAI when the mechanism requires anti-rotation guidance, symmetric force delivery, or a secondary rear-rod actuation point. The G3/4 PT port and M36x2 rod thread handle high flow and heavy side loads.
To match this cylinder for a direct replacement, verify the ISO 15552 mounting dimensions and select from the SAID accessory set: Basic, FA, LB, TC, FTC, TCM1, or TCM2 (FB, CA, CB, and CR are omitted from this double-rod series). Note that the overall length is longer than a single-rod unit to accommodate the rear protrusion, so design your end-of-stroke clearance accordingly.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID200 Double Rod Cylinder SAID200X150 FAQ
It delivers 15079 N at 0.5 MPa, 21110 N at 0.7 MPa, and 27141 N at 0.9 MPa. Because it is a double-rod cylinder, this force is identical in both the extend and retract directions.
Yes, the SAID200X150 is dimensionally interchangeable per ISO 15552 profile cylinder standards. You can use the Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounting accessories for direct integration.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAID200 Double Rod Cylinder SAID200X150
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.