
The AirTAC SAID200 Double Rod Cylinder SAID200X165 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 165mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID200X165 is a double-acting, double-rod ISO 15552 profile cylinder engineered for heavy-duty symmetrical actuation. A single piston drives a carbon steel rod out of both end covers, yielding an identical effective area on both sides. This translates to an equal extend and retract force of 15079 N at 0.5 MPa, ensuring perfectly balanced motion control.
Because the rod protrudes from the rear cover, you can mount a secondary cam or position flag opposite the primary workpiece. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement, while the adjustable air cushions at both ends absorb kinetic energy. Note that the through-rod design requires additional rear clearance compared to a single-rod SAI.
| Model | Airtac SAID200 Double Rod Cylinder SAID200X165 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives heavy push-pull mechanisms where identical 15079 N thrust is required in both directions without speed variation.
The twin-rod geometry keeps heavy lateral loads guided and prevents the piston from twisting during transit.
Mounts a cam or flag on the rear rod end to trigger external position sensors while the front rod handles the work.
Selecting this 200 mm bore model is ideal when your mechanism requires massive equal-force transfer in both directions, anti-rotation guidance, or dual-station actuation. If your application needs less force, stepping down to the 160 mm bore provides 9425 N at 0.5 MPa. Conversely, if you only need one-way thrust, a standard single-rod SAI avoids the extra rear-rod clearance. The SAID200X165 uses PT tapered ports and supports mountings Basic, FA, LB, TC, FTC, TCM1, and TCM2.
For strokes of 300 mm or longer, the unsupported mass of the rod increases bending risks, making an external guide rail essential to prevent premature bearing wear. Remember that standard air cushions only decelerate the piston near stroke end; they do not hold the load. If air pressure drops, the cylinder will drift. For dead-end holding, consider an external pilot-operated check valve or the BSAID clamp-lock variant.
Quick checklist
Because the rod occupies both sides of the piston, the effective annulus area is identical for extend and retract. The output force is 15079 N each way at 0.5 MPa, 21110 N at 0.7 MPa, and 27141 N at 0.9 MPa.
Yes, the SAID200X165 is dimensionally interchangeable per ISO 15552 mounting dimensions. It uses a standard PT G3/4 port and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, making it a direct replacement for other ISO 15552 profile double-rod cylinders.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.