Airtac SAID200 Double Rod Cylinder SAID200X200
The AirTAC Airtac SAID200 Double Rod Cylinder SAID200X200 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 200mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ200 mm
- Stroke200 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID200 Double Rod Cylinder SAID200X200
The AirTAC SAID200X200 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 200 mm bore and 200 mm stroke. Because a carbon steel rod exits both end covers, the effective piston area is identical on extend and retract. This yields equal force and speed in both directions, providing 15079 N at 0.5 MPa and up to 27141 N at 0.9 MPa each way.
The twin-rod architecture allows mounting a primary workpiece on one end and a position flag, cam, or secondary mechanism on the rear rod. The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE electronic switches, though this unit lacks the -S magnet. Adjustable air cushions at both ends absorb end-of-stroke impact, but note this cylinder drifts if air pressure is lost.
Airtac SAID200 Double Rod Cylinder SAID200X200 Technical Specifications
| Model | Airtac SAID200 Double Rod Cylinder SAID200X200 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID200 Double Rod Cylinder SAID200X200
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID200 Double Rod Cylinder SAID200X200 Is Used
Heavy Pressing
Provides 27141 N of symmetric force at 0.9 MPa for heavy-duty pressing and forming operations requiring identical push and pull strength.
Symmetric Transfer
Drives dual-station transfer mechanisms where the rear rod simultaneously moves a secondary assembly or position flag.
Anti-Rotation Guide
Keeps massive loads guided against rotation without external guide rails, utilizing the inherent stability of twin rods.
Is the Airtac SAID200 Double Rod Cylinder SAID200X200 the Right Cylinder?
Select this 200 mm bore cylinder when an application demands massive bidirectional force that is perfectly symmetric, delivering 15079 N both ways at 0.5 MPa. If you need less force, stepping down to the 160 mm bore yields 9425 N at 0.5 MPa. The double-rod design is chosen over a single-rod SAI when the load requires high anti-rotation resistance or dual-side actuation. The G3/4 PT port and M36x2 rod thread handle high flow and heavy loads.
This SAID200X200 is dimensionally interchangeable with other ISO 15552 double-rod cylinders, using the standard mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). It does not hold position without live pressure; for load-holding, consider an external rod lock or the BSAID clamp-lock variant. Although the 200 mm stroke is short, the rear rod protrudes and requires clearance.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID200 Double Rod Cylinder SAID200X200 FAQ
Because it is a double-rod cylinder, the extend and retract forces are equal. It provides 15079 N both ways at 0.5 MPa, 21110 N at 0.7 MPa, and 27141 N at 0.9 MPa.
Yes, the SAID200X200 is dimensionally interchangeable per ISO 15552 mounting dimensions. It uses a standard profile barrel and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAID200 Double Rod Cylinder SAID200X200
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.