
The AirTAC SAID200 Double Rod Cylinder SAID200X210 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 210mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID200X210 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 200 mm bore and 210 mm stroke. Because a carbon steel rod exits both end covers, the effective piston area is identical on extend and retract. This yields exactly 15079 N of force in both directions at 0.5 MPa, eliminating the speed and force mismatch found in single-rod actuators.
This massive actuator features a G3/4 PT port and a 40 mm rod with an M36x2 thread. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches. Its twin-rod architecture is ideal for driving a primary workpiece on one end while mounting a cam or position flag on the rear rod.
| Model | Airtac SAID200 Double Rod Cylinder SAID200X210 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives heavy-duty press assemblies where the 15079 N extend and retract forces must be perfectly matched for consistent bidirectional forming.
Actuates a dual-station transfer mechanism, using one rod end to move the primary payload and the rear rod end to trigger a synchronized cam.
Guides heavy structural components without rotational drift, leveraging the twin 40 mm carbon steel rods to resist torsional deflection.
Select the SAID200X210 when an application demands massive equal bidirectional force and high torsional rigidity. If you need slightly less thrust, stepping down to the 160 mm bore yields 9425 N both ways at 0.5 MPa. Choose this double-rod variant over a single-rod SAI when you need anti-rotation guidance or dual-side actuation. Note that the adjustable air cushions at both ends only decelerate the piston near stroke end; they do not hold a load. If your machine must prevent drift upon loss of air pressure, integrate an external rod lock or specify a BSAID clamp-lock cylinder.
For ISO 15552 interchangeability, confirm the 200 mm bore, 210 mm stroke, G3/4 port, and required mounting accessory (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Since this model lacks the -S magnet suffix, it cannot host CMSE or DMSE sensors without modification. At a 210 mm stroke, the extended twin rods create significant bending moments under side loads; always support the load with an external linear guide.
Quick checklist
The SAID200X210 provides 15079 N of force in both the extend and retract directions at 0.5 MPa. Because the 40 mm rod occupies both sides of the piston, the annulus area is equal both ways, resulting in identical push and pull forces.
Yes, the SAID200X200 is dimensionally interchangeable per ISO 15552. It shares the same mounting interface and profile barrel dimensions as other standard ISO 15552 double-rod cylinders, allowing a direct replacement without altering your machine footprint.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.