Airtac SAID200 Double Rod Cylinder SAID200X600
The AirTAC SAID200 Double Rod Cylinder SAID200X600 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 600mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ200 mm
- Stroke600 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID200 Double Rod Cylinder SAID200X600
The AirTAC SAID200X600 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 200 mm bore and 600 mm stroke. Because the piston rod extends from both end covers, the annulus area is identical on both sides, yielding equal push and pull forces of 15079 N at 0.5 MPa. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting.
This through-rod configuration allows you to mount the primary workpiece on one end while utilizing the rear rod end for a position flag, cam, or secondary mechanism. It uses a standard carbon steel rod and PT tapered port threads. The adjustable air cushions at both ends decelerate the piston near stroke end, but note this cylinder does not hold load without live air pressure.
Airtac SAID200 Double Rod Cylinder SAID200X600 Technical Specifications
| Model | Airtac SAID200 Double Rod Cylinder SAID200X600 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID200 Double Rod Cylinder SAID200X600
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID200 Double Rod Cylinder SAID200X600 Is Used
Twin-Station Actuation
Drives two separate mechanisms simultaneously from opposite rod ends, ensuring perfectly synchronized motion for heavy material transfer lines.
Anti-Rotation Slides
The dual-rod design prevents piston rotation under high torque, providing precise linear guidance for heavy press and forming operations.
Symmetric-Force Transfer
Ideal for shuttle systems requiring identical 15079 N push and pull forces to maintain balanced momentum during rapid direction changes.
Is the Airtac SAID200 Double Rod Cylinder SAID200X600 the Right Cylinder?
Choose this 200 mm bore model when an application demands massive symmetric force and high anti-rotation stability that a single-rod SAI cannot provide. If you need slightly less force, stepping down to the 160 mm bore yields 9425 N at 0.5 MPa. Conversely, if your application requires less than 10000 N, consider smaller bores to reduce air consumption and overall footprint.
Because this model features a 600 mm stroke, the long unsupported rod is subject to side-load and rod-bearing bending; using an external guide is highly recommended to prevent premature wear. For dimensionally interchangeable direct replacements per ISO 15552, match the 200 mm bore, 600 mm stroke, G3/4 port, and mounting accessories from the SAID set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Note that FB, CA, CB, and CR mounts are omitted from this double-rod series. To hold a load safely when air is exhausted, an external rod lock or pilot-operated check valve is required.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID200 Double Rod Cylinder SAID200X600 FAQ
Because the double-rod design results in equal annulus areas on both sides, the output force is 15079 N at 0.5 MPa, 21110 N at 0.7 MPa, and 27141 N at 0.9 MPa in both extend and retract directions.
Yes, the SAID200X600 is dimensionally interchangeable per ISO 15552. It serves as a direct replacement for other ISO 15552 profile cylinders with a 200 mm bore, 600 mm stroke, and G3/4 ports, without claiming to be a specific brand's part.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAID200 Double Rod Cylinder SAID200X600
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.