Airtac SAID32 Double Rod Cylinder SAID32AX10
The AirTAC SAID32 Double Rod Cylinder SAID32AX10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 10mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke10 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID32 Double Rod Cylinder SAID32AX10
The AirTAC SAID32X10 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 10mm stroke. Because a SUS420J2 stainless steel rod exits both end covers, the effective annulus area is identical on extend and retract, yielding an equal 483 N of force in either direction at 0.7 MPa.
This through-rod layout lets you mount the primary workpiece on one end while using the rear extension for a cam, position flag, or secondary mechanism. The extruded aluminum barrel includes sensor grooves on both sides, and the 10mm stroke is a non-standard made-to-order length for short-stroke dual-guidance tasks.
Airtac SAID32 Double Rod Cylinder SAID32AX10 Technical Specifications
| Model | Airtac SAID32 Double Rod Cylinder SAID32AX10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID32 Double Rod Cylinder SAID32AX10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID32 Double Rod Cylinder SAID32AX10 Is Used
Short-Stroke Clamping
Provides symmetric clamping force on both extend and retract strokes for precision machining fixtures.
Twin-Station Actuation
Drives two synchronized mechanisms simultaneously using the front and rear rod ends for mirrored motion.
Rear-Cam Triggering
Mounts a cam or limit flag on the rear rod extension to actuate external mechanical valves or sensors.
Is the Airtac SAID32 Double Rod Cylinder SAID32AX10 the Right Cylinder?
Choose this 32mm bore double-rod cylinder when your application requires equal push and pull forces (483 N at 0.7 MPa) and anti-rotation guidance over a very short 10mm stroke. If you need less force, a smaller profile cylinder is appropriate; if you need more, stepping up to the 40mm bore provides 739 N both ways. Unlike a single-rod SAI, the SAID twin-rod design prevents piston drift rotation and supports dual-side loads.
This model uses a PT tapered port thread and a SUS420J2 stainless steel rod. It supports the reduced SAID mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and is dimensionally interchangeable per ISO 15552. Note that a plain SAID does not hold its load when air is exhausted; use a SAIL or BSAID lock variant if position holding is required.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID32 Double Rod Cylinder SAID32AX10 FAQ
Because the double-rod design subtracts the rod area on both sides, the extend and retract forces are equal. It delivers 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa in both directions.
Yes, it is dimensionally interchangeable per ISO 15552 and serves as a direct replacement for other ISO 15552 double-rod profile cylinders, using the standard SAID mounting accessory set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32AX10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.