Airtac SAID32 Double Rod Cylinder SAID32AX100
The AirTAC SAID32 Double Rod Cylinder SAID32AX100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 100mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke100 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID32 Double Rod Cylinder SAID32AX100
The AirTAC SAID32X100 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 100mm stroke. Because a rod extends from both end covers, the annulus area is identical on extension and retraction, yielding a perfectly symmetrical 483 N of thrust and pull force at 0.7 MPa. The extruded aluminum barrel includes sensor grooves on both sides for straightforward position tracking.
This unit is configured with a SUS420J2 stainless steel rod (material code A) for superior corrosion resistance and utilizes PT tapered port threading. The through-rod architecture allows engineers to mount a primary workpiece on one end while attaching a cam, position flag, or secondary mechanism on the opposite end, maximizing layout flexibility.
Airtac SAID32 Double Rod Cylinder SAID32AX100 Technical Specifications
| Model | Airtac SAID32 Double Rod Cylinder SAID32AX100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID32 Double Rod Cylinder SAID32AX100
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID32 Double Rod Cylinder SAID32AX100 Is Used
Symmetric Force Transfer
Ideal for automated assemblies requiring identical push and pull forces, ensuring consistent actuation speeds regardless of direction.
Dual-Station Actuation
The through-rod design allows driving a primary workpiece on the front while a rear cam operates a secondary mechanism simultaneously.
Anti-Rotation Slides
Provides superior load guidance and prevents rotational twist compared to single-rod cylinders, ensuring precise linear movement.
Is the Airtac SAID32 Double Rod Cylinder SAID32AX100 the Right Cylinder?
Select this 32mm bore model when an application demands equal push and pull velocities alongside dual-side anti-rotation guidance. If your mechanism requires less force, stepping down is not an option in this series, but stepping up to the 40mm bore provides 739 N both ways at 0.7 MPa. Choose the SAID double-rod over a single-rod SAI when you need a rear-mounted limit flag or to drive a second station synchronously.
Remember that the adjustable air cushions at both ends only decelerate the piston near stroke end; they do not hold a load. If your system loses air pressure, the cylinder will drift, requiring an external rod lock or a SAIL pneumatic lock variant for safety. Being dimensionally interchangeable per ISO 15552, it serves as a direct replacement for other ISO 15552 double-rod cylinders, utilizing the Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounting set.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID32 Double Rod Cylinder SAID32AX100 FAQ
It provides an equal force of 345 N at 0.5 MPa and 483 N at 0.7 MPa in both extension and retraction directions, as the rod area is subtracted from both sides of the piston.
No, the standard SAID cylinder does not feature a locking mechanism. The adjustable air cushions only decelerate the piston near the stroke end; for position holding without live pressure, consider the SAIL or BSAID variants.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32AX100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.