Airtac SAID32 Double Rod Cylinder SAID32AX105
The AirTAC SAID32 Double Rod Cylinder SAID32AX105 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 105mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke105 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID32 Double Rod Cylinder SAID32AX105
The AirTAC SAID32X105 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and a 105mm made-to-order stroke. Because a rod extends from both end covers, the annulus area is identical on both sides, yielding exactly 483 N of thrust and pull force at 0.7 MPa. This symmetric force capability is ideal for mechanisms requiring consistent dynamics in both travel directions.
This specific configuration features a SUS420J2 stainless steel rod (material code A) for enhanced corrosion resistance over standard carbon steel. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches. Note that the 105mm stroke is non-standard and requires a longer overall length to accommodate the protruding rear rod.
Airtac SAID32 Double Rod Cylinder SAID32AX105 Technical Specifications
| Model | Airtac SAID32 Double Rod Cylinder SAID32AX105 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 105 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID32 Double Rod Cylinder SAID32AX105
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×105 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID32 Double Rod Cylinder SAID32AX105 Is Used
Symmetric Force Transfer
Drives a transfer shuttle where the 483 N both-way force ensures identical push and pull speeds for balanced product handling.
Rear-Rod Cam Actuation
Mounts the primary workpiece on the front rod while the rear SUS420J2 rod end drives a secondary cam or limit flag.
Anti-Rotation Slides
Utilizes the twin-rod guidance to prevent piston rotation in a vertical lifting slide without adding external guides.
Is the Airtac SAID32 Double Rod Cylinder SAID32AX105 the Right Cylinder?
Choose this 32mm bore cylinder when an application strictly requires equal push and pull forces, such as 345 N at 0.5 MPa both ways. If your mechanism needs less force, stepping down is not an option within the SAID range, but if you need significantly more thrust, the 40mm bore provides 528 N at 0.5 MPa. The twin-rod design provides superior anti-rotation guidance compared to a single-rod SAI, allowing you to mount a cam or position flag on the rear rod end.
This SAID model uses a PT tapered port (G1/8) and accepts mounting accessories from the reduced ISO 15552 set: Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). Remember that the adjustable air cushions only decelerate the piston near stroke end; they do not hold a load. If your system loses air pressure, the cylinder will drift, requiring an external pilot-operated check valve or a SAIL/BSAID lock model for position holding. Since the 105mm stroke is non-standard, verify rear-rod clearance in your layout.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID32 Double Rod Cylinder SAID32AX105 FAQ
Because the double-rod design subtracts the rod area from both sides of the piston, the force is identical in both directions. It provides 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa for both extension and retraction.
Yes, the SAID32X105 is dimensionally interchangeable per ISO 15552 mounting interface dimensions. It uses a PT G1/8 port and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, making it a direct replacement for other ISO 15552 double-rod cylinders.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32AX105
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.