Airtac SAID32 Double Rod Cylinder SAID32AX115
The AirTAC SAID32 Double Rod Cylinder SAID32AX115 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 115mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke115 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID32 Double Rod Cylinder SAID32AX115
The AirTAC SAID32X115 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and a 115mm stroke. Because the piston rod exits both end covers, the effective annulus area is identical on extend and retract, yielding an equal 483N of force in each direction at 0.7 MPa. This specific 115mm stroke is a non-standard made-to-order length.
Equipped with a SUS420J2 stainless steel rod (material code A), it provides excellent corrosion resistance for demanding environments. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to mount position switches anywhere along the stroke, while the rear rod end can drive a secondary mechanism or limit flag.
Airtac SAID32 Double Rod Cylinder SAID32AX115 Technical Specifications
| Model | Airtac SAID32 Double Rod Cylinder SAID32AX115 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 115 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID32 Double Rod Cylinder SAID32AX115
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×115 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID32 Double Rod Cylinder SAID32AX115 Is Used
Symmetric Force Transfer
Drives a workpiece back and forth with identical 483N force and speed in both directions, ensuring perfectly balanced transfer motions.
Twin-Station Actuation
Mounts the primary tool on the front rod end and a secondary cam or position flag on the rear rod end to trigger external sensors simultaneously.
Anti-Rotation Slides
The dual-rod construction provides superior side-load guidance and prevents the piston from twisting during vertical or horizontal sliding tasks.
Is the Airtac SAID32 Double Rod Cylinder SAID32AX115 the Right Cylinder?
Choose this 32mm bore double-rod cylinder when your application demands equal push and pull forces, or requires anti-rotation guidance and twin-station actuation. If you need less force, stepping down is not an option below 32mm, but stepping up to a 40mm bore increases the both-way force to 739N at 0.7 MPa. Conversely, if you only need standard unidirectional actuation, the single-rod SAI series is more compact.
This model features PT tapered port threads and a G1/8 air supply. It supports the reduced SAID mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting the FB, CA, CB, and CR accessories used on single-rod variants. Note that a plain SAID does not hold its load when air pressure is lost; for fail-safe holding, consider the SAIL or BSAID series. Since the 115mm stroke is non-standard, expect a made-to-order lead time.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID32 Double Rod Cylinder SAID32AX115 FAQ
Because the double-rod design subtracts the rod area from both sides of the piston, the extend and retract forces are equal. It generates 345N at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa in both directions.
Yes, the SAID32X115 is dimensionally interchangeable per ISO 15552 and serves as a direct replacement for other ISO 15552 double-rod profile cylinders, using the standard mounting interface dimensions.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32AX115
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.