
The AirTAC SAID32 Double Rod Cylinder SAID32AX135 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 135mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X135 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 135mm stroke. Because a rod exits both end covers, the annulus area is identical on extend and retract, yielding an equal 345N of force each way at 0.5 MPa. The 135mm stroke is a non-standard made-to-order length, meaning the overall physical length is longer than standard SAI variants to accommodate the protruding rear rod.
This configuration uses a SUS420J2 stainless steel rod for superior corrosion resistance and includes PT tapered port threads (G1/8). The extruded aluminum barrel features sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAID32 Double Rod Cylinder SAID32AX135 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 135 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×135 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a workpiece with identical 345N push and pull force at 0.5 MPa, ensuring consistent timing and pressure on both stroke transitions without force imbalance.
The twin-rod design naturally resists torsional rotation, making it ideal for lifting or sliding heavy fixtures that would bind or twist on a single rod.
Uses the protruding rear rod end to trigger a mechanical limit flag or operate a secondary mechanism simultaneously with the primary front-side work tool.
Choose this double-rod model over a single-rod SAI when your mechanism requires dual-side guidance, anti-rotation resistance, or a rear-rod extension for mounting a secondary cam, position flag, or driving a second tool. If you need less force, stepping down is not an option in the same footprint, but stepping up to the 40mm bore yields 528N each way at 0.5 MPa. Keep in mind that a plain SAID does not hold its position or load when air is lost; for dead-air holding, consider an external rod lock, a SAIL cylinder, or the BSAID clamp-lock variant.
As a true ISO 15552 cylinder, it is dimensionally interchangeable with other ISO 15552 double-rod cylinders. For this 135mm non-standard stroke, ensure you provide adequate rear-rod clearance in your machine design. Because the stroke exceeds 100mm, be mindful of side-load and rod-bearing bending; use an external guide for heavy or off-center loads to prevent premature wear.
Quick checklist
Because it is a double-rod cylinder, the effective area is the same on both sides. It delivers an equal force of 345N in both extend and retract directions at 0.5 MPa, and 483N each way at 0.7 MPa.
Yes, it is dimensionally interchangeable per ISO 15552. It accepts the SAID mounting set which includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 accessories, but omits the FB, CA, CB, and CR brackets used on single-rod variants.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.