
The AirTAC SAID32 Double Rod Cylinder SAID32AX165S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 165mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X165-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and a 165mm made-to-order stroke. Because the piston rod extends through both end covers, the effective annulus area is identical on extend and retract, yielding exactly 483 N of force in both directions at 0.7 MPa. The -S suffix indicates an integrated magnet for position sensing.
This unit is configured with a SUS420J2 stainless steel rod (material code A) for enhanced corrosion resistance, and utilizes PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to mount CMSE reed or DMSE solid-state switches on either end to track the rear rod extension.
| Model | Airtac SAID32 Double Rod Cylinder SAID32AX165S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a workpiece back and forth where equal 483 N force and speed are strictly required in both directions, preventing speed discrepancies during transfer.
Mounts the primary tool on the front rod and a position flag on the rear rod, using the -S magnet with DMSE solid-state switches to confirm stroke completion.
Utilizes the twin-rod architecture to guide a sliding mechanism against rotational torque, eliminating the need for an external guide rail in light-duty slides.
Select this 32mm bore double-rod cylinder when an application requires equal push and pull forces, anti-rotation guidance, or a rear-rod cam. It provides 483 N each way at 0.7 MPa; stepping up to a 40mm bore increases that to 739 N, while dropping to a smaller bore is not available in this ISO 15552 series. Because the 165mm stroke exceeds the standard 50mm increment, it is manufactured as a non-standard made-to-order length.
As a true ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 double-rod cylinders without claiming brand equivalence. It uses the reduced SAID mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting the FB, CA, CB, and CR accessories found on single-rod SAI models. Note that the adjustable air cushions only decelerate the piston near stroke end; they do not hold a load. If position holding without live air pressure is required, use an external rod lock or pilot-operated check valve.
Quick checklist
Because the rod occupies both sides of the piston, the push and pull forces are equal. It generates 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa in both directions.
No, the adjustable air cushions only decelerate the piston near the end of the stroke and do not act as a brake. If you need to hold a load without live pressure, consider an external rod lock or a related AirTAC type like the SAIL or BSAID.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.