verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAID32 Double Rod Cylinder SAID32AX170

The AirTAC SAID32 Double Rod Cylinder SAID32AX170 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 170mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke170 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$82.11 $89.61Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAID32 stroke, mounting and version on one page All SAID32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAID32 Double Rod Cylinder SAID32AX170

The AirTAC SAID32X170 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 170mm stroke. Because the piston rod exits both end covers, the annulus area is identical on both sides, yielding an equal extend and retract force of 345N at 0.5 MPa. This symmetric thrust makes it ideal for mechanisms requiring consistent bidirectional power.

This variant is equipped with a SUS420J2 stainless steel rod for enhanced corrosion resistance and utilizes PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of position switches. Note that because a rod protrudes from the rear, the overall length is longer than a single-rod SAI, requiring extra clearance in your layout.

Airtac SAID32 Double Rod Cylinder SAID32AX170 Technical Specifications

ModelAirtac SAID32 Double Rod Cylinder SAID32AX170
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke170 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAID32 Double Rod Cylinder SAID32AX170

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×170Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAID32 Double Rod Cylinder SAID32AX170 Is Used

straighten

Anti-Rotation Slides

The twin-rod design prevents piston rotation, providing precise linear guidance for vertical sliding doors and heavy industrial drawers without external rails.

sync_alt

Symmetric Force Transfer

Delivers identical 345N push and pull forces at 0.5 MPa, ensuring perfectly balanced kinetic energy for delicate pick-and-place operations.

settings_input_component

Rear-Cam Actuation

The protruding rear rod acts as a mechanical cam or trigger, sequencing secondary pneumatic valves or mechanical limit switches independently of the main work tool.

Is the Airtac SAID32 Double Rod Cylinder SAID32AX170 the Right Cylinder?

Select this 32mm bore when your mechanism demands equal push and pull forces, rear-rod cam actuation, or inherent anti-rotation guidance that a single-rod SAI cannot provide. If your application requires less force, stepping down is not an option in this series, but stepping up to a 40mm bore yields 528N each way at 0.5 MPa. The 170mm stroke falls within the standard 25-1000mm range for this bore, operating at speeds between 30-800 mm/s.

For mounting, the SAID series supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 accessories, deliberately omitting the FB, CA, CB, and CR styles found on single-rod variants. Since the stroke is under 300mm, side-load stress on the rod bearing is moderate, though external guidance is still recommended for heavy radial loads. Remember that the adjustable air cushions only decelerate the piston near stroke end; they do not hold a load. If pressure drops, the cylinder drifts, so consider a SAIL or BSAID for locking requirements.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAID32 Double Rod Cylinder SAID32AX170 FAQ

Because the double-rod design subtracts the rod area from both sides of the piston, the force is identical in both directions. It provides 345N at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa.

Yes, the SAID32X170 is dimensionally interchangeable per ISO 15552 mounting dimensions. It uses a PT G1/8 port and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, making it a direct profile-cylinder replacement.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32AX170

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAID32AX170 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.