
The AirTAC SAID32 Double Rod Cylinder SAID32AX20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 20mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X20 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 20mm stroke. Because a rod exits both ends, the annulus area is identical on extend and retract, yielding 345N of force each way at 0.5 MPa. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting.
This variant features a SUS420J2 stainless steel rod (code A) for enhanced corrosion resistance and uses PT tapered port threads. The through-rod design allows mounting a workpiece on one end and a position flag or cam on the other, providing superior anti-rotation guidance compared to single-rod SAI units.
| Model | Airtac SAID32 Double Rod Cylinder SAID32AX20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a shuttle mechanism where the 345N extend and retract forces must remain perfectly balanced for smooth bilateral material handling.
Uses the twin-rod guidance to keep a 20mm short-stroke pick-and-place head perfectly aligned without twisting under offset loads.
Mounts the primary tool on the front rod and a rear cam or limit flag on the protruding back rod to trigger secondary sequence valves.
Choose this 32mm bore when an application demands equal push and pull forces, specifically 345N in both directions at 0.5 MPa. The twin-rod architecture is selected over a single-rod SAI when the mechanism requires dual-side guidance to prevent rotation or needs to drive a secondary mechanism from the rear rod. If your setup must hold a load without live air pressure, note that standard air cushions only decelerate near stroke end; consider an external rod lock or SAIL cylinder instead.
Being dimensionally interchangeable per ISO 15552, it serves as a direct replacement for other ISO 15552 double-rod cylinders. It uses a PT G1/8 port and supports the reduced SAID mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2. If you need position sensing, specify the -S magnet option to use CMSE reed or DMSE electronic switches.
Quick checklist
Because the double-rod design subtracts the rod area on both sides, the output force is equal in both directions. It provides 345N at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa.
Yes, the SAID32X20 is a true ISO 15552 profile cylinder, making it dimensionally interchangeable with other ISO 15552 double-rod cylinders. It uses a PT G1/8 port and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.