Airtac SAID32 Double Rod Cylinder SAID32AX210S
The AirTAC SAID32 Double Rod Cylinder SAID32AX210S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 210mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke210 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID32 Double Rod Cylinder SAID32AX210S
The AirTAC SAID32X210-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 210mm stroke. Because the piston rod extends from both end covers, the effective annulus area is identical on the extend and retract sides. This provides an equal 483N of force in both directions at 0.7 MPa, ensuring perfectly symmetric motion control.
Equipped with a magnet (-S), this variant supports AirTAC CMSE reed and DMSE electronic sensors housed within the dual side grooves of the extruded aluminum barrel. It features a SUS420J2 stainless steel rod (code A) for enhanced corrosion resistance and utilizes PT tapered port threads (G1/8). The rear rod protrusion allows a secondary cam or position flag to be mounted opposite the primary workpiece.
Airtac SAID32 Double Rod Cylinder SAID32AX210S Technical Specifications
| Model | Airtac SAID32 Double Rod Cylinder SAID32AX210S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID32 Double Rod Cylinder SAID32AX210S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID32 Double Rod Cylinder SAID32AX210S Is Used
Symmetric Force Transfer
Drives a transfer carriage with identical 483N force extending and retracting, ensuring consistent dwell times and smooth cycling without speed variations.
Through-Rod Sensing
Mounts the primary workpiece on the front rod and a DMSE electronic sensor flag on the rear protruding rod to verify stroke completion in tight spaces.
Anti-Rotation Slides
Uses the dual-ended rod geometry to guide a vertical lift slide, preventing torsional twist that would occur with a single-rod configuration.
Is the Airtac SAID32 Double Rod Cylinder SAID32AX210S the Right Cylinder?
Select this 32mm bore when an application demands equal push and pull forces, specifically 483N at 0.7 MPa, which is lower than the 528N found on the 40mm bore variant. A twin-rod design is preferred over a single-rod SAI when you need dual-side guidance to prevent rotation or require actuation and sensing at both ends. Note that the adjustable air cushions only decelerate the piston near stroke end; they do not lock the load. If position holding without live air pressure is required, consider an external pilot-operated check valve or the BSAID clamp-lock series. As a standard 210mm stroke, it drops into any ISO 15552 dimensionally interchangeable footprint.
Because the stroke exceeds 300mm on larger bores, side loading becomes a concern, but at 210mm this compact unit handles its load well. However, always ensure adequate rear clearance for the protruding secondary rod. The correct mounting set for this profile cylinder includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID32 Double Rod Cylinder SAID32AX210S FAQ
Because it is a double-rod cylinder, the force is identical in both directions due to equal annulus areas. It outputs 345N at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa for both extend and retract strokes.
Yes, the SAID32X210-S is dimensionally interchangeable per ISO 15552 standards. You can drop it in as a replacement for other ISO 15552 double-rod cylinders using the same mounting accessories and PT G1/8 port threads.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32AX210S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.