
The AirTAC SAID32 Double Rod Cylinder SAID32AX225 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 225mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X225 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 225mm stroke. Because a rod extends from both end covers, the effective piston area is identical in both directions, yielding perfectly symmetrical thrust of 345N each way at 0.5 MPa.
This configuration uses a SUS420J2 stainless steel rod for enhanced durability against moisture and wear. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to mount position switches independently on either end to track the twin rod extensions.
| Model | Airtac SAID32 Double Rod Cylinder SAID32AX225 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 225 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a transfer arm where the extend and retract cycles must move identical 345N loads at uniform speeds without requiring pressure compensation.
Guides a vertical lifting slide using both rod ends to prevent mechanical twisting during travel, ensuring precise vertical alignment.
Actuates a primary workpiece on the front rod while the rear rod simultaneously triggers a remote limit flag or secondary mechanism.
Select this 32mm bore when an application requires equal push and pull forces alongside anti-rotation guidance, rather than the asymmetric output of a single-rod SAI. If your mechanism needs less force, stepping down is not an option in this series, but stepping up to the 40mm bore provides 528N both ways at 0.5 MPa. Note that a plain SAID does not hold position if air pressure is lost; for locking requirements, consider the SAIL or BSAID series.
At 225mm stroke, the unsupported rod length increases, making the 12mm rod and M10x1.25 thread susceptible to bending under heavy lateral loads. Implement an external guide rail to prevent side-load damage. This model uses PT tapered ports and supports mountings Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
Because it is a double-rod cylinder, the rod area is subtracted from both sides of the piston. This results in equal force in both directions: 345N at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa.
Yes, the SAID32X225 is dimensionally interchangeable per ISO 15552 standards. It shares the exact mounting footprint of other ISO 15552 double-rod profile cylinders, allowing for a direct replacement.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.