Airtac SAID32 Double Rod Cylinder SAID32AX225S
The AirTAC SAID32 Double Rod Cylinder SAID32AX225S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 225mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke225 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID32 Double Rod Cylinder SAID32AX225S
The AirTAC SAID32X225-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and a 225mm non-standard stroke. Because a rod exits both end covers, the annulus area is identical on extend and retract, yielding equal push and pull forces of 483 N at 0.7 MPa. This through-rod geometry provides superior anti-rotation guidance for external loads compared to a single-rod SAI.
Equipped with a -S magnet, this unit supports AirTAC CMSE reed and DMSE solid-state electronic sensors housed in the dual-side barrel grooves. The rod is constructed from SUS420J2 stainless steel for enhanced corrosion resistance, and the 225mm stroke is a made-to-order length exceeding the standard 500mm maximum for this bore. PT tapered port threads are utilized for pneumatic connections.
Airtac SAID32 Double Rod Cylinder SAID32AX225S Technical Specifications
| Model | Airtac SAID32 Double Rod Cylinder SAID32AX225S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 225 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID32 Double Rod Cylinder SAID32AX225S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID32 Double Rod Cylinder SAID32AX225S Is Used
Symmetric Force Transfer
Drives a workpiece back and forth with identical 483N thrust at 0.7MPa in both directions, ensuring consistent timing for parts pushing and ejection.
Anti-Rotation Slides
The twin-rod architecture prevents piston rotation, providing precise linear guidance for vertical lifting and pressing without external guides.
Through-Rod Sensing
Mounts the primary tool on the front rod while utilizing the rear rod end to trigger a physical limit flag or DMSE sensor target.
Is the Airtac SAID32 Double Rod Cylinder SAID32AX225S the Right Cylinder?
Select this specific double-rod cylinder when an application requires symmetric force and speed in both directions, alongside dual-side load guiding. If you need higher thrust, stepping up to a 40mm bore provides 528 N at 0.5 MPa, but the 32mm bore offers 345 N at 0.5 MPa in a more compact ISO 15552 footprint. The double-rod design is chosen over a single-rod SAI when a rear cam, secondary mechanism, or position flag must be driven from the opposite end.
This model uses PT tapered ports and includes a magnet for CMSE/DMSE switches. Mounting accessories are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). Because the 225mm stroke is non-standard, expect made-to-order lead times. Note that the variable air cushions at both ends only decelerate the piston near stroke end; they do not hold a load. If position holding without live pressure is required, consider an SAIL or BSAID cylinder. Ensure adequate rear clearance for the protruding rod.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID32 Double Rod Cylinder SAID32AX225S FAQ
The double-rod design provides equal force in both extend and retract directions. It delivers 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa.
Yes, the SAID32X225-S is dimensionally interchangeable per ISO 15552 profile cylinder standards. It uses PT ports and supports AirTAC CMSE and DMSE sensors via its dual-side barrel grooves.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32AX225S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.