Airtac SAID32 Double Rod Cylinder SAID32AX900
The AirTAC SAID32 Double Rod Cylinder SAID32AX900 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 900mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke900 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID32 Double Rod Cylinder SAID32AX900
The AirTAC SAID32X900 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 900mm stroke. Because the piston rod exits both end covers, the effective annulus area is identical on extend and retract, yielding equal force and speed in both directions. This specific bore generates 345N each way at 0.5MPa, rising to 621N at 0.9MPa.
Equipped with a SUS420J2 stainless steel rod (material code A), this variant provides enhanced corrosion resistance compared to standard carbon steel. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. Note that because the rear rod protrudes continuously, you must account for additional rear clearance in your machine design.
Airtac SAID32 Double Rod Cylinder SAID32AX900 Technical Specifications
| Model | Airtac SAID32 Double Rod Cylinder SAID32AX900 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 900 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID32 Double Rod Cylinder SAID32AX900
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×900 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID32 Double Rod Cylinder SAID32AX900 Is Used
Symmetric Force Transfer
Drives a transfer carriage where the workpiece mounts on the front rod and a counterweight balances the rear, utilizing the equal 483N force at 0.7MPa for consistent motion.
Anti-Rotation Slides
Powers a long-stroke 900mm linear slide where the twin rods prevent the payload from twisting during traverse, ensuring precise alignment without external guides.
Through-Rod Sensing
Actuates a packaging flap where the front rod pushes the product and the rear rod triggers a mechanical limit flag, streamlining machine control logic.
Is the Airtac SAID32 Double Rod Cylinder SAID32AX900 the Right Cylinder?
Selecting this double-rod cylinder is ideal when your mechanism requires dual-side guidance, anti-rotation stability, or a rear rod end to drive a secondary cam and position flag. If your application demands less force, stepping down is not an option in this bore size, but stepping up to the 40mm bore provides 528N both ways at 0.5MPa. Conversely, if you only need one-way actuation, the single-rod SAI series is more compact.
This 900mm stroke model approaches the maximum standard stroke limit for a 32mm bore. At this extended length, the 12mm rod is susceptible to bending under side loads, so an external guide rail is strongly recommended to prevent rod-bearing damage. This cylinder uses a PT tapered port thread and supports mounting accessories Basic, FA, LB, TC, FTC, TCM1, and TCM2. It does not hold position pneumatically; if air pressure is lost, the piston will drift, requiring an external pilot-operated check valve for load holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID32 Double Rod Cylinder SAID32AX900 FAQ
Because it is a double-rod cylinder, the force is equal in both directions. It provides 345N at 0.5MPa, 483N at 0.7MPa, and 621N at 0.9MPa for both extend and retract strokes.
Yes, the SAID32X900 is dimensionally interchangeable per ISO 15552 and serves as a direct replacement for other ISO 15552 double-rod profile cylinders, utilizing the standard mounting interface.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32AX900
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.