Airtac SAID32 Double Rod Cylinder SAID32AX95
The AirTAC SAID32 Double Rod Cylinder SAID32AX95 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 95mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke95 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID32 Double Rod Cylinder SAID32AX95
The AirTAC SAID32X95 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32 mm bore and 95 mm stroke. Because the piston rod exits both end covers, the annulus area is identical on extend and retract, yielding equal push and pull forces of 483 N at 0.5 MPa. This symmetry is ideal for mechanisms requiring consistent dynamic response in both travel directions.
This variant is equipped with a SUS420J2 stainless steel rod (material code A) for enhanced corrosion resistance over standard carbon steel. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to mount position switches along either rail. Note that because the rear rod protrudes, you must account for additional clearance at the back of the cylinder when designing your mounting envelope.
Airtac SAID32 Double Rod Cylinder SAID32AX95 Technical Specifications
| Model | Airtac SAID32 Double Rod Cylinder SAID32AX95 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID32 Double Rod Cylinder SAID32AX95
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID32 Double Rod Cylinder SAID32AX95 Is Used
Symmetric Force Transfer
Drives a transfer carriage with identical 483 N force and speed in both directions, ensuring smooth material handoff without momentum imbalances.
Rear-Cam Actuation
Uses the protruding rear rod end to trigger a mechanical limit valve or cam, while the front rod performs the primary workpiece clamping.
Anti-Rotation Guidance
Twin rod ends keep a precision sliding block guided and prevented from twisting during short-stroke positioning under side loads.
Is the Airtac SAID32 Double Rod Cylinder SAID32AX95 the Right Cylinder?
Choose this 32 mm bore when an application demands 483 N of bidirectional force at 0.5 MPa, or step down if lower force is acceptable. A double-rod design is preferred over a single-rod SAI when you need to drive a cam or position flag from the rear rod end, or when dual-side guidance is required to prevent the load from rotating. The SAID mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR styles found on single-rod variants.
This cylinder uses PT tapered port threads (G1/8) and lacks a standard magnet, so it will not trigger AirTAC CMSE or DMSE sensors without modification. It is dimensionally interchangeable per ISO 15552, serving as a direct replacement for other ISO 15552 double-rod cylinders. Remember that the adjustable air cushions only decelerate the piston near stroke end; this cylinder will not hold a load if air pressure is lost. For locking needs, consider SAIL or BSAID variants.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID32 Double Rod Cylinder SAID32AX95 FAQ
Because it is a double-rod cylinder, the output force is identical in both extend and retract directions. It provides 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa.
Yes, the SAID32X95 is dimensionally interchangeable per ISO 15552. It shares the same mounting footprint and profile barrel design, making it a direct replacement for comparable ISO 15552 double-rod cylinders.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32AX95
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.