verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAID32 Double Rod Cylinder SAID32AX950S

The AirTAC SAID32 Double Rod Cylinder SAID32AX950S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 950mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke950 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$173.32 $188.71Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAID32 stroke, mounting and version on one page All SAID32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAID32 Double Rod Cylinder SAID32AX950S

The AirTAC SAID32X950-S is a double-acting, double-rod ISO 15552 profile cylinder engineered for applications requiring equal force and speed in both directions. Because the piston rod exits both end covers, the annulus area is identical on extend and retract, yielding a symmetrical 345 N of thrust and pull at 0.5 MPa. This specific configuration features a SUS420J2 stainless steel rod (material code A) for enhanced corrosion resistance and includes a magnet (-S) for position sensing.

With a 950 mm stroke, this unit exceeds the 32 mm bore standard maximum of 1000 mm but requires made-to-order rear-rod clearance due to the through-rod design. The extruded aluminum barrel integrates sensor grooves on both sides, allowing you to mount CMSE reed or DMSE electronic switches precisely where needed along the extended travel.

Airtac SAID32 Double Rod Cylinder SAID32AX950S Technical Specifications

ModelAirtac SAID32 Double Rod Cylinder SAID32AX950S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke950 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAID32 Double Rod Cylinder SAID32AX950S

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×950Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAID32 Double Rod Cylinder SAID32AX950S Is Used

sync_alt

Symmetric Force Transfer

Drives a transfer carriage where the equal 345 N extend and retract forces at 0.5 MPa prevent speed variations between forward and return strokes.

straighten

Anti-Rotation Slides

Uses the twin-rod geometry to guide a vertical sliding gate over the 950 mm travel, preventing torsional twist without external guides.

settings_input_component

Through-Rod Sensing

Mounts a physical cam on the rear rod protrusion to trigger a mechanical limit switch, while the front rod performs the primary work.

Is the Airtac SAID32 Double Rod Cylinder SAID32AX950S the Right Cylinder?

Choose this 32 mm bore when a compact footprint is needed but your mechanism demands symmetrical bidirectional force, unlike a single-rod SAI which has a lower retract force. If your application requires less force, stepping down is not an option in this bore series, but stepping up to a 40 mm bore increases the both-way output to 528 N at 0.5 MPa. The double-rod design is ideal here for anti-rotation guidance and mounting a rear cam or position flag.

Because this model has a 950 mm stroke, the 12 mm rod is highly susceptible to side-load bending and rod-bearing wear; an external linear guide is strictly recommended to support the load. Note that the adjustable air cushions at both ends decelerate the piston but do not hold the load if air pressure is lost—for position holding without live pressure, consider a SAIL lock cylinder or an external pilot-operated check valve. This cylinder is dimensionally interchangeable per ISO 15552 and uses a PT tapered port thread.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAID32 Double Rod Cylinder SAID32AX950S FAQ

Because it is a double-rod cylinder, the effective piston area is the same on both sides. It outputs 345 N in both extend and retract directions at 0.5 MPa, and 621 N both ways at 0.9 MPa.

Yes, it is dimensionally interchangeable with ISO 15552 profile cylinders. However, the SAID series supports a specific mounting subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2. It omits FB, CA, CB, and CR mounts.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32AX950S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAID32AX950S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.