
The AirTAC SAID32 Double Rod Cylinder SAID32BX1000 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 1000mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X1000 is a double-acting, double-rod ISO 15552 profile cylinder engineered for demanding symmetry and anti-rotation tasks. Because the SUS304 stainless steel rod exits both end covers, the annulus area is identical on extend and retract, yielding an equal 483 N of force in each direction at 0.7 MPa. This 1000 mm stroke is a non-standard, made-to-order length for the 32 mm bore.
Having a rod protrude from the rear cover allows you to mount a position flag or cam for external sensing while driving the primary load on the front. The extruded aluminum barrel features sensor grooves on both sides, though position detection requires adding a magnet. Note that the through-rod design increases the overall physical length, necessitating extra rear clearance in your machine layout.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX1000 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a secondary mechanism from the rear rod end while maintaining identical push and pull forces, ensuring balanced motion across long 1000 mm travels.
The twin-rod architecture prevents the piston from twisting during extension, providing precise linear guidance for delicate handling tasks.
Mounts a physical cam or limit flag on the protruding rear rod to trigger external mechanical switches without interfering with the primary front-side work area.
Select this specific 32 mm bore when an application demands exactly 345 N of bidirectional force at 0.5 MPa, stepping up to the 40 mm bore provides 528 N if your payload increases. A double-rod configuration is chosen over a single-rod SAI when you need twin-station actuation, superior anti-rotation guidance, or rear-rod tracking. As a dimensionally interchangeable ISO 15552 component, it drops in seamlessly with other standard profile cylinders.
Because this model features a 1000 mm stroke, the unsupported rod length is highly susceptible to side-load bending; an external guide bearing is strongly recommended to prevent premature seal wear. This SAID32X1000 is configured with PT tapered ports and SUS304 stainless steel rods. Remember that the adjustable air cushions only decelerate the piston near stroke end; this cylinder will drift if air pressure is lost and cannot hold a load without an external pilot-operated check valve.
Quick checklist
Because the rod occupies both sides of the piston, the effective area is equal in both directions. The SAID32X1000 generates 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa on both the extend and retract strokes.
Yes, the SAID32X1000 is dimensionally interchangeable per ISO 15552 and uses the standard mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). It serves as a direct replacement for other ISO 15552 double-rod profile cylinders.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.