verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAID32 Double Rod Cylinder SAID32BX100S

The AirTAC SAID32 Double Rod Cylinder SAID32BX100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 100mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke100 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$75.26 $84.03Save 10% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAID32 stroke, mounting and version on one page All SAID32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAID32 Double Rod Cylinder SAID32BX100S

The AirTAC SAID32X100-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 100mm stroke. Because the piston rod exits both end covers, the effective annulus area is identical on extend and retract. This provides an equal 483N of force in both directions at 0.7 MPa, preventing the speed and force mismatches common to single-rod actuators.

Equipped with a magnet (-S), this variant supports AirTAC CMSE reed and DMSE electronic sensors along the dual side grooves. It uses SUS304 stainless steel rods (code B) for superior corrosion resistance and features PT tapered port threads. The rear rod extension is ideal for mounting a secondary cam, position flag, or driving a second mechanism simultaneously.

Airtac SAID32 Double Rod Cylinder SAID32BX100S Technical Specifications

ModelAirtac SAID32 Double Rod Cylinder SAID32BX100S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke100 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAID32 Double Rod Cylinder SAID32BX100S

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×100Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAID32 Double Rod Cylinder SAID32BX100S Is Used

sync_alt

Symmetric Force Transfer

Drives a transfer arm where equal push and pull momentum is critical, using the 483N both-way output to move parts smoothly without deceleration spikes.

straighten

Anti-Rotation Slides

Guides a vertical sliding gate with twin rods to prevent torsional twisting, ensuring precise linear tracking without binding.

settings_input_component

Through-Rod Sensing

Actuates a primary clamping tool on the front stroke while the rear rod end triggers a DMSE electronic sensor flag for exact position confirmation.

Is the Airtac SAID32 Double Rod Cylinder SAID32BX100S the Right Cylinder?

Select this 32mm bore when an application demands exactly matched push and pull dynamics, offering 345N both ways at 0.5 MPa. If your mechanism needs less force, stepping down is not an option as 32mm is the smallest standard size; stepping up to a 40mm bore yields 528N both ways. Choose the double-rod SAID over a single-rod SAI when you need dual-side guidance to prevent rotation or require rear-end position sensing.

This cylinder uses a reduced mounting accessory set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR brackets. Note that the adjustable air cushions only decelerate the piston near stroke end; they do not hold a load. If position holding without live air pressure is required, use an external pilot-operated check valve or explore the SAIL lock cylinder series. Ensure you leave rear-rod clearance in your design, as the through-rod protrudes both ends.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAID32 Double Rod Cylinder SAID32BX100S FAQ

Because the rod occupies both sides of the piston, the force is equal in both directions. It provides 345N at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa for both extend and retract strokes.

Yes, the SAID32X100-S is dimensionally interchangeable per ISO 15552. You can use it as a direct replacement for other ISO 15552 double-rod cylinders, provided your mounting uses the Basic, FA, LB, TC, FTC, TCM1, or TCM2 interface.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32BX100S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAID32BX100S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.