
The AirTAC SAID32 Double Rod Cylinder SAID32BX110 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 110mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X110 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 110mm stroke. Because the piston rod exits both end covers, the effective annulus area is identical on extension and retraction, yielding exactly 483 N of force in both directions at 0.7 MPa. This symmetric output is ideal for mechanisms requiring consistent push and pull dynamics.
Equipped with SUS304 stainless steel rods, this variant offers enhanced corrosion resistance for humid or mildly chemically washed environments. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of position switches. Note that the overall length is greater than a single-rod SAI unit, requiring rear-rod clearance to prevent mechanical interference.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX110 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a reciprocating shuttle where the 483 N push and pull forces must be perfectly matched to maintain consistent cycle timing without tweaking regulator pressures.
Moves a light fabrication head along a 110mm path using the twin SUS304 rods to prevent torsional deflection during precision spot welding or drilling.
Actuates a primary clamping jaw on the front rod end while using the rear protruding rod to trip a mechanical limit flag for a secondary sequencing valve.
Select this 32mm bore when an application demands equal 483 N bi-directional force at 0.7 MPa, stepping down from a 40mm bore (739 N) for tighter spatial constraints, or up from a smaller unit if more thrust is needed. A double-rod design is preferred over a single-rod SAI when you need to mount a secondary cam, drive a second tool, or achieve superior anti-rotation guidance for the payload.
This cylinder uses a PT tapered port thread and operates at 30-800 mm/s. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR brackets found on single-rod variants. Remember that the adjustable air cushions only decelerate the piston near stroke ends; they do not hold the load if air pressure drops. For position holding without live pressure, consider an external pilot-operated check valve or a SAIL lock cylinder.
Quick checklist
Because the rod occupies both sides of the piston, the effective area is equal in both directions. It provides 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa for both extension and retraction.
Yes, it is dimensionally interchangeable per ISO 15552 profile standards. However, the SAID series uses a specific mounting subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2. It does not support the FB, CA, CB, or CR brackets found on single-rod SAI models.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.