
The AirTAC SAID32 Double Rod Cylinder SAID32BX130 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 130mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X130 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 130mm stroke. Because the SUS304 stainless steel rod exits both end covers, the effective piston area is identical in both directions, yielding exactly 483N of force at 0.7 MPa on extend and retract.
This through-rod design allows you to mount the primary workpiece on the front rod and a position flag or cam on the rear rod for external sensing. The extruded aluminum barrel includes sensor grooves on both sides, though adding a magnet requires the -S option for CMSE reed or DMSE electronic switches.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX130 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a transfer mechanism where the 483N push and pull forces must be perfectly equal, preventing jerky movements during directional changes.
Guides a sliding carriage using the twin-rod structure to resist torsional twisting, maintaining precise alignment without external linear bearings.
Actuates a primary clamp on the front stroke while the rear SUS304 rod end drives a mechanical flag past a remote sensor to confirm position.
Select this 32mm bore when an application requires 483N of symmetrical force and anti-rotation guidance, stepping down from a 40mm bore (739N) to save space, or up from a 25mm class if more thrust is needed. A double-rod configuration is preferred over a single-rod SAI when you need to drive twin stations or prevent load twisting. Remember that a plain SAID does not hold position without live air pressure; for locking, consider SAIL or BSAID.
For a direct replacement, match the 32mm bore, 130mm stroke, PT tapered port threads, and the appropriate mounting accessory from the SAID set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Since the stroke is 130mm, side-load risks are moderate, but always ensure the load is guided externally if subjected to lateral forces.
Quick checklist
Because it is a double-rod cylinder, the force is equal in both directions. It provides 345N at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa for both extend and retract strokes.
Yes, it is dimensionally interchangeable per ISO 15552. However, the SAID series uses a specific mounting subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2. It omits FB, CA, CB, and CR styles found on single-rod variants.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.