verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAID32 Double Rod Cylinder SAID32BX150

The AirTAC SAID32 Double Rod Cylinder SAID32BX150 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 150mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke150 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$78.07 $87.02Save 10% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAID32 stroke, mounting and version on one page All SAID32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAID32 Double Rod Cylinder SAID32BX150

The AirTAC SAID32X150 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32 mm bore and 150 mm stroke. Because a rod exits both end covers, the annulus area is identical on extend and retract, yielding equal push and pull forces of 345 N each way at 0.5 MPa. This through-rod geometry provides superior anti-rotation guidance and allows a secondary mechanism or position flag to be driven from the rear.

This unit is configured with SUS304 stainless steel rods (code B) for corrosion resistance and PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches, though this specific SKU is supplied without a piston magnet.

Airtac SAID32 Double Rod Cylinder SAID32BX150 Technical Specifications

ModelAirtac SAID32 Double Rod Cylinder SAID32BX150
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke150 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAID32 Double Rod Cylinder SAID32BX150

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×150Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAID32 Double Rod Cylinder SAID32BX150 Is Used

sync_alt

Symmetric Force Transfer

Drives a workpiece forward and retracts it with identical 345 N force, ensuring consistent speed and torque in both travel directions.

straighten

Anti-Rotation Slides

The twin-rod architecture prevents piston rotation, making it ideal for lifting vertical slides or guiding delicate tooling without lateral play.

settings_input_component

Rear-Side Sensing

Uses the protruding rear rod end to mount a physical limit flag, triggering an external sensor while the front rod performs the primary work.

Is the Airtac SAID32 Double Rod Cylinder SAID32BX150 the Right Cylinder?

Choose this 32 mm bore when an application demands symmetric force and speed in both directions, offering 345 N at 0.5 MPa. If your mechanism requires less force, stepping down is not an option in the SAID series as 32 mm is the smallest bore; stepping up to a 40 mm bore increases the both-way output to 528 N at 0.5 MPa. A double-rod design is preferred over a single-rod SAI when you need to mount a workpiece on one end and a cam or limit flag on the other, or when strict resistance to torsional load is required.

This model uses PT tapered ports and is dimensionally interchangeable per ISO 15552. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). Note that the adjustable air cushions at both ends only decelerate the piston near stroke end; they do not hold a load. If position holding without live air pressure is required, consider an external rod lock or the SAIL/BSAID series. For this 150 mm stroke, the unsupported load should be guided externally to prevent rod-bearing bending.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAID32 Double Rod Cylinder SAID32BX150 FAQ

Because it is a double-rod cylinder, the force is equal in both directions. It provides 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa for both extension and retraction.

Yes, the SAID32X150 is an extruded aluminum profile cylinder with standard ISO 15552 mounting dimensions, making it a direct replacement for other ISO 15552 double-rod cylinders. It uses PT ports and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32BX150

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAID32BX150 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.