
The AirTAC SAID32 Double Rod Cylinder SAID32BX15S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 15mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X15-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a compact 15mm stroke. Because a SUS304 stainless steel rod exits both end covers, the effective piston area is identical in each direction, yielding exactly 345 N of output force at 0.5 MPa on both extend and retract strokes. This symmetric force prevents speed discrepancies between directional movements.
Equipped with a built-in magnet (-S), this variant directly supports AirTAC CMSE reed and DMSE electronic solid-state sensors mounted into the dual-side extruded barrel grooves. The PT tapered port threads (G1/8) and adjustable air cushions at both ends ensure reliable sealing and smooth end-of-stroke deceleration for high-cycle precision tasks.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX15S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Provides equal 345 N clamping and release force at 0.5 MPa for securing delicate workpieces without rotational drift during machining.
Drives a dual-sided pick-and-place mechanism where the rear rod end simultaneously actuates a secondary escapement or position flag.
Leverages the -S magnet and dual barrel grooves to trigger DMSE electronic sensors for precise end-of-stroke confirmation in tight assembly machinery.
Select this 32mm bore double-rod actuator when an application requires equal push and pull forces within a very short 15mm travel, avoiding the annular area mismatch of a single-rod SAI cylinder. If your mechanism needs slightly higher symmetric force, stepping up to the 40mm bore provides 528 N each way at 0.5 MPa, but the 32mm offers a tighter footprint. The twin SUS304 rods provide inherent anti-rotation guidance and allow driving a secondary cam or position flag from the rear rod end.
As a dimensionally interchangeable ISO 15552 profile cylinder, it serves as a direct replacement for other standard double-rod actuators. It utilizes the SAID mounting accessory set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting the FB, CA, CB, and CR brackets found on single-rod variants. Note that the adjustable air cushions only decelerate the piston near stroke end; this cylinder will not hold a load if air pressure is lost, requiring an external rod lock or a SAIL/BSAID variant for pneumatic locking duties.
Quick checklist
Because the double-rod design subtracts the rod area on both sides of the piston, the force is equal in both directions. It provides 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa for both extend and retract strokes.
Yes, it is a true ISO 15552 profile cylinder, making its mounting interface dimensionally interchangeable with other ISO 15552 double-rod cylinders. It uses the SAID mounting bracket set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and features PT G1/8 ports.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.