
The AirTAC SAID32 Double Rod Cylinder SAID32BX165 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 165mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X165 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 165mm stroke. Because the piston rod extends from both end covers, the annulus area is identical on both sides. This means extend and retract forces are perfectly equal, providing about 483 N of thrust in each direction at 0.5 MPa.
This configuration uses a SUS304 stainless steel rod for superior corrosion resistance. The rear rod extension is ideal for mounting a position flag or driving a secondary mechanism. It features adjustable air cushions at both ends and dual sensor grooves, though a magnet is not included on this unit.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX165 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Ideal for pushing and pulling loads that require identical 483 N force and matching speeds in both travel directions without recalculating annulus areas.
The twin-rod design naturally resists torsional twisting, providing stable linear guidance for precision sliding fixtures.
Mount a cam or position flag on the rear rod extension to trigger external sensors without interfering with the primary workpiece on the front rod.
Choose this double-rod cylinder when your mechanism requires equal force and speed in both directions, or needs anti-rotation guidance and rear-rod sensing. If your application needs less force, dropping to a smaller bore is an option, but stepping up to a 40mm bore yields 528 N each way at 0.5 MPa. Unlike a single-rod SAI, this SAID model gives you a rear rod for twin-station actuation.
This cylinder uses a PT tapered port thread and accepts Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounting accessories. It is dimensionally interchangeable per ISO 15552. Note that the air cushions only decelerate the piston near stroke end; they do not hold a load. If position holding without air pressure is required, use a SAIL lock cylinder or an external pilot-operated check valve.
Quick checklist
Because it is a double-rod cylinder, the force is equal in both directions. It provides 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa for both extension and retraction.
Yes, the SAID32X165 is dimensionally interchangeable with other ISO 15552 profile cylinders. It uses the standard ISO 15552 mounting interface and shares the same footprint, but omits FB, CA, CB, and CR mounts.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.