
The AirTAC SAID32 Double Rod Cylinder SAID32BX180 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 180mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X180 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 180mm stroke. Because the piston rod exits both end covers, the effective annulus area is identical on extend and retract, yielding equal push and pull forces of 483N at 0.7 MPa. This symmetric force output makes it ideal for applications requiring consistent dynamic performance in both directions.
This specific configuration utilizes SUS304 stainless steel rods (material code B) for superior corrosion resistance in humid or washdown environments. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches. Note that the rear rod protrudes during operation, requiring additional clearance behind the rear cover compared to a single-rod SAI cylinder.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX180 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×180 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a transfer shuttle where the workpiece is pushed and pulled with identical 483N force, ensuring consistent timing and acceleration profiles in both travel directions.
Powers a vertical lifting slide where the twin rods prevent the platform from twisting under offset loads, maintaining precise vertical alignment without external linear bearings.
Actuates a clamping mechanism on the front rod while the rear rod end drives a physical limit flag, triggering external pneumatic CMSE or DMSE sensors for position confirmation.
Select this 32mm bore double-rod cylinder when your mechanism requires equal 483N force and speed in both directions, or when you need to mount a secondary cam and position flag on the rear rod end. If your application demands higher thrust, stepping up to the 40mm bore provides 528N each way. Unlike a single-rod SAI, the twin-rod design inherently resists torsional rotation, providing better load guidance without external guides for short strokes.
For a direct replacement, match the 32mm bore, 180mm stroke, PT tapered port thread (G1/8), and the ISO 15552 mounting interface. Available mounting accessories include Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). Remember that the adjustable air cushions only decelerate the piston near stroke end; this cylinder will drift and cannot hold a load if air pressure is lost. For positive holding, consider an external rod lock or a SAIL cylinder.
Quick checklist
Because it is a double-rod cylinder, the push and pull forces are equal. It generates 345N at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa in both extend and retract directions.
Yes, the SAID32X180 is dimensionally interchangeable per ISO 15552. You can drop it in as a replacement for other ISO 15552 double-rod profile cylinders, provided you use the PT G1/8 port and compatible mounting hardware.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.