
The AirTAC SAID32 Double Rod Cylinder SAID32BX185S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 185mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X185-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 185mm stroke. Because the piston rod extends from both end covers, the annulus area is identical on both sides, yielding exactly 483N of force in both extend and retract directions at 0.5 MPa. The -S suffix denotes an integrated magnet for position sensing.
This specific configuration uses SUS304 stainless steel rods (option B) for superior corrosion resistance. It features PT tapered port threads (G1/8) and adjustable air cushions at both ends. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to mount CMSE reed or DMSE electronic switches exactly where needed.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX185S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 185 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×185 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a workpiece from one end while the opposing rear rod moves an identical secondary load, maintaining equal 483N thrust and matching speeds in both travel directions.
Twin SUS304 rods exiting both covers provide inherent torsional resistance, keeping guided slides perfectly aligned without twisting under dynamic loads.
Mounts an external cam or physical limit flag on the rear rod end to trigger external mechanical sensors, while the internal magnet operates CMSE/DMSE switches.
Select this 32mm bore when an application requires 345N of symmetrical force at 0.5 MPa, stepping up to the 40mm bore (528N) only if higher thrust is necessary. A double-rod design is preferred over a single-rod SAI when you need dual-side guidance to prevent rotation, or when a rear rod end is required to mount a cam or position flag. Note that a plain SAID does not hold position unpowered; for locking needs, consider SAIL or BSAID variants.
As a dimensionally interchangeable ISO 15552 cylinder, it drops in seamlessly for other standard profile double-rod units. Ensure you specify the PT port thread, the SUS304 rod material, and the -S magnet. For this 185mm stroke, the side load is manageable, but always keep the load guided to prevent rod-bearing bending. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
Because it is a double-rod cylinder, the effective piston area is equal on both sides. It delivers 345N of force at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa in both the extend and retract directions.
Yes, the SAID32X185-S is dimensionally interchangeable per ISO 15552 standards. It shares the exact same mounting footprint as other standard profile cylinders, though you must account for the rear rod protrusion clearance and confirm the PT port thread.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.