
The AirTAC SAID32 Double Rod Cylinder SAID32BX20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 20mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X20-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 20mm stroke. Because the piston rod exits both end covers, the annulus area is identical on both sides, yielding exactly 345 N of force in both extend and retract directions at 0.5 MPa. This through-rod geometry provides superior anti-rotation guidance compared to a single-rod SAI.
This specific configuration includes a SUS304 stainless steel rod (option B) for superior corrosion resistance and a built-in magnet (-S) for position sensing. The extruded aluminum barrel features sensor grooves on both sides, allowing you to mount CMSE reed or DMSE electronic switches on either end to track the rear rod end.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a transfer mechanism where the 345 N push and pull forces must be perfectly matched to avoid jerky movements during direction changes.
Uses the twin-rod geometry to guide a sliding workpiece, preventing rotation without needing external guide rods in a compact 20mm stroke.
Mounts the primary tool on the front rod while using the rear rod end to trigger a DMSE electronic sensor for a secondary confirmation signal.
Select this 32mm bore when an application requires perfectly symmetric force and speed in both directions, offering 345 N at 0.5 MPa. If you need less force, step down is not possible as 32mm is the smallest size, but stepping up to a 40mm bore yields 528 N. Choose the double-rod SAID over a single-rod SAI when you need to mount a secondary cam or position flag on the rear rod, or require dual-side guidance to prevent the load from twisting.
This cylinder uses a PT tapered port thread and accepts mounting accessories from the SAID subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). Note that the adjustable air cushions only decelerate the piston near the stroke ends; they do not hold the load. If air pressure is lost, the cylinder will drift, requiring an external rod lock or a SAIL/BSAID variant for true position holding. As a true ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 double-rod cylinders.
Quick checklist
Because it is a double-rod cylinder, the effective piston area is the same on both sides. It provides an equal force of 345 N in both the extend and retract directions at 0.5 MPa (483 N at 0.7 MPa).
Yes, the SAID32X20-S is an extruded aluminum profile cylinder with standard ISO 15552 mounting dimensions, making it a direct replacement for other ISO 15552 double-rod cylinders, while offering AirTAC's specific PT port and SUS304 rod options.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.