
The AirTAC SAID32 Double Rod Cylinder SAID32BX220 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 220mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X220 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 220mm stroke. Because the piston rod exits both end covers, the annulus area is identical on both sides, yielding equal push and pull forces of 483 N at 0.5 MPa and 621 N at 0.7 MPa. This symmetric force output is ideal for applications requiring consistent speed and power in both directions.
This specific configuration utilizes SUS304 stainless steel rods (material code B) for superior corrosion resistance, making it suitable for humid or mildly chemically washed environments. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of position switches. Note that because the rear rod protrudes through the back cover, you must account for additional rear clearance in your machine design compared to a single-rod SAI cylinder.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX220 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a workpiece back and forth with identical 483 N force on both the extend and retract strokes, ensuring consistent cycle timing without pressure spikes.
Uses the twin 12mm SUS304 rods to guide the payload and prevent rotational drift during horizontal transfer, eliminating the need for a separate guide rail.
Mounts the primary tool on the front rod end and a mechanical cam on the rear protruding rod to trigger secondary mechanical valves or limit flags simultaneously.
Select this 32mm bore double-rod cylinder when your mechanism requires equal bidirectional force (483 N both ways at 0.5 MPa) or needs anti-rotation guidance via twin rod supports. If your application demands higher thrust, stepping up to the 40mm bore provides 528 N both ways at 0.5 MPa. Conversely, if space is tight and force requirements are lower, this 32mm bore is the smallest available in the SAID series. The PT tapered port threads (G1/8) ensure a tight pneumatic seal.
With a 220mm stroke, the unsupported rod length increases, making the 12mm rod more susceptible to bending under heavy lateral loads; an external linear guide is recommended to prevent premature bearing wear. This cylinder uses the reduced SAID mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting FB, CA, CB, and CR brackets found on single-rod variants. As a standard double-acting cylinder, it does not hold position or lock the load when air pressure is lost; for holding requirements, consider an external pilot-operated check valve or the BSAID clamp-lock series. It is dimensionally interchangeable per ISO 15552.
Quick checklist
Because it is a double-rod cylinder, the effective piston area is the same on both sides. It delivers an equal force of 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa in both the extend and retract directions.
Yes, the SAID32X220 is dimensionally interchangeable per ISO 15552 and can serve as a direct replacement for other ISO 15552 double-rod profile cylinders. Ensure you use the SAID mounting accessory set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and provide rear clearance for the through-rod.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.