
The AirTAC SAID32 Double Rod Cylinder SAID32BX260 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 260mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X260 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 260mm stroke. Because the piston rod extends from both end covers, the annulus area is identical on both sides, yielding equal push and pull forces of 483 N at 0.6 MPa (345 N at 0.5 MPa). This symmetric force profile ensures consistent speed and thrust in both directions.
This specific configuration utilizes a SUS304 stainless steel rod (option B) for superior corrosion resistance, paired with PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. A rod exits both ends, allowing you to mount a workpiece on the front and a cam or position flag on the rear for dual-side guidance.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX260 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 260 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×260 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a workpiece forward and backward with identical 483 N thrust, ensuring consistent clamping or pressing pressure regardless of travel direction.
The twin-rod design inherently resists torsional rotation, guiding loads smoothly without needing external linear bearings for light to medium duties.
Mounts the primary tool on the front rod end while utilizing the rear rod protrusion to trip a mechanical limit switch or actuate a secondary mechanism.
Select this 32mm bore when an application demands equal 483 N thrust both directions alongside anti-rotation stability. If your project requires less force, stepping down is not an option in this series (32 is the smallest), but stepping up to a 40mm bore provides 528 N at 0.5 MPa. Choose the double-rod SAID over a single-rod SAI when you need to drive twin stations, prevent load rotation, or mount rear sensors. Note that a plain SAID does not hold position unpowered; use SAIL or BSAID variants if pneumatic locking is required.
For a direct replacement, match the 32mm bore, 260mm stroke, PT port thread, and mounting accessory (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Since the 260mm stroke exceeds 300mm? No, but at 260mm you should still evaluate side loads. For any stroke approaching 300mm, ensure external guides support the load to prevent rod-bearing bending, despite the 12mm rod diameter providing decent stiffness.
Quick checklist
Because it is a double-rod cylinder, the force is equal in both directions. It provides 345 N at 0.5 MPa, 483 N at 0.6 MPa, and 621 N at 0.7 MPa.
Yes, the SAID32X260 is dimensionally interchangeable per ISO 15552. Ensure you match the 32mm bore, 260mm stroke, PT ports, and use the appropriate mounting bracket from the SAID set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.