verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAID32 Double Rod Cylinder SAID32BX290

The AirTAC SAID32 Double Rod Cylinder SAID32BX290 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 290mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke290 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$95.81 $103.31Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAID32 stroke, mounting and version on one page All SAID32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAID32 Double Rod Cylinder SAID32BX290

The AirTAC SAID32X290 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 290mm stroke. Because the twin rods occupy both sides of the piston, the effective annulus area is identical in both directions, yielding an equal extend and retract force of 345N at 0.5MPa. This symmetric thrust makes it ideal for applications requiring consistent dynamic performance without differential speed shifts.

This specific configuration features a SUS304 stainless steel rod (material code B) for superior corrosion resistance in humid or mildly chemically exposed environments. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic solid-state switches. Note that the through-rod design requires additional rear clearance compared to a single-rod SAI to accommodate the protruding secondary rod end.

Airtac SAID32 Double Rod Cylinder SAID32BX290 Technical Specifications

ModelAirtac SAID32 Double Rod Cylinder SAID32BX290
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke290 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAID32 Double Rod Cylinder SAID32BX290

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×290Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAID32 Double Rod Cylinder SAID32BX290 Is Used

sync_alt

Symmetric Force Transfer

Delivers equal 345N push and pull forces at 0.5MPa, ensuring perfectly balanced speed and thrust for transfer systems that require identical dynamic performance in both directions.

straighten

Anti-Rotation Slides

The twin 12mm rods guide the load against rotation without external rails, making it ideal for short-stroke lifting and pressing slides where torsional stability is critical.

settings_input_component

Rear-Cam Actuation

The protruding rear rod end provides a convenient mounting point for a position flag or cam, allowing secondary mechanism triggering or sensor targeting from the back side.

Is the Airtac SAID32 Double Rod Cylinder SAID32BX290 the Right Cylinder?

Choose this 32mm bore double-rod cylinder when your mechanism requires equal push and pull forces, dual-side guidance to prevent rotation, or a rear-rod output for mounting a secondary cam or position flag. If your application needs higher force, stepping up to the 40mm bore provides 528N at 0.5MPa. At 290mm of stroke, the 12mm rod is susceptible to bending under lateral loads, so an external guide rail is recommended to prevent rod-bearing wear.

As a dimensionally interchangeable ISO 15552 profile cylinder, it serves as a direct replacement for other standard double-rod actuators with a PT G1/8 port and Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounting accessories. Be aware that a plain SAID does not hold its position or lock a load when air pressure is lost or the valve is centered; the piston will drift. For fail-safe load holding, consider an external pilot-operated check valve or the related SAIL lock cylinder.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAID32 Double Rod Cylinder SAID32BX290 FAQ

The SAID32X290 provides equal force in both directions due to its double-rod design. It generates 345N at 0.5MPa, 483N at 0.7MPa, and 621N at 0.9MPa on both extend and retract strokes.

Yes, the SAID32X290 is a profile cylinder dimensionally interchangeable per ISO 15552. It uses a PT G1/8 port and a standard mounting interface, serving as a direct replacement for other ISO 15552 double-rod cylinders.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32BX290

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAID32BX290 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.