
The AirTAC SAID32 Double Rod Cylinder SAID32BX30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 30mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X30 is a double-acting, double-rod profile cylinder built to ISO 15552 dimensional standards. Because the SUS304 stainless steel rod exits both end covers, the effective piston area is identical on extend and retract, yielding an equal 483 N of force in each direction at 0.7 MPa.
This twin-rod layout provides superior anti-rotation guidance compared to a single-rod SAI. You can mount the primary workpiece on the front rod end and use the rear protrusion to drive a secondary mechanism or trigger a position flag. It features adjustable air cushioning at both ends and dual sensor grooves on the extruded aluminum barrel.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a clamping jaw that must push and pull with identical 483 N force, ensuring consistent pressure regardless of direction.
Guides a lightweight vertical lift where the twin SUS304 rods prevent the platform from twisting during short 30 mm movements.
Actuates a primary tool on the front stroke while the rear rod end trips a mechanical limit flag for precise end-of-travel signaling.
Choose this 32 mm bore when an application demands 483 N of symmetric force in a compact footprint. If your mechanism requires less push or pull, stepping down is not an option in this series, but stepping up to a 40 mm bore raises the both-way output to 739 N at 0.7 MPa. A double-rod design is selected over a single-rod SAI when you need dual-side guidance to prevent load twisting or require rear-end actuation.
This cylinder uses PT tapered port threads and a G1/8 air supply. It does not hold position if air pressure is lost; use a SAIL or BSAID variant if pneumatic locking is required. As a dimensionally interchangeable ISO 15552 unit, it drops in seamlessly with standard Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounting accessories.
Quick checklist
Because the rod occupies both sides of the piston, the extend and retract forces are equal. It provides 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa in both directions.
Yes, it is dimensionally interchangeable with standard ISO 15552 profile cylinders. It supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, but omits FB, CA, CB, and CR styles.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.