
The AirTAC SAID32 Double Rod Cylinder SAID32BX35 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 35mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X35 is a double-acting, double-rod ISO 15552 profile cylinder engineered for symmetric motion tasks. Because the SUS304 stainless steel rod exits both end covers, the effective piston area is identical in both directions. This yields an equal extend and retract force of 345 N at 0.5 MPa, ensuring perfectly balanced cycling.
Beyond matching push and pull dynamics, the twin-rod architecture allows you to mount a primary workpiece on the front rod and a position flag or cam on the rear rod. The extruded aluminum barrel features sensor grooves on both sides, and fluid connections use PT tapered ports sized at G1/8.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX35 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a lightweight payload where equal push and pull thrust is critical, preventing speed fluctuations between extend and retract strokes.
Uses the extended rear rod to mechanically trigger an external limit switch, providing a physical confirmation of the retracted state.
Leverages the twin-rod geometry to guide a small pick-and-place jaw, resisting torsional twist without needing external linear bearings.
Select this 32 mm bore when an application demands equal force both ways (345 N at 0.5 MPa) and superior anti-rotation guidance compared to a single-rod SAI. If your mechanism requires less force, stepping down is not an option in this series, but stepping up to the 40 mm bore increases the both-way output to 528 N at 0.5 MPa. The 35 mm stroke keeps the assembly highly compact, meaning rod-bearing bending is negligible and no external guide is strictly necessary for light loads.
This model is dimensionally interchangeable per ISO 15552, making it a direct replacement for other ISO 15552 double-rod cylinders. It uses a reduced mounting accessory set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR brackets. Note that the adjustable air cushions only decelerate the piston near stroke end; this cylinder will drift if air pressure is lost, so use a SAIL or BSAID variant if absolute position holding is required.
AirtacDistr lists every SAID32 order code with its price on one page at https://airtacdistr.com/products/airtac-said32-double-rod-iso-cylinder
Quick checklist
Because the rod occupies both sides of the piston, the push and pull forces are identical. It generates 345 N both ways at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa.
Yes, it is dimensionally interchangeable with ISO 15552 profile cylinders. However, SAID only supports the Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounting variants; FB, CA, CB, and CR brackets are not compatible.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.